WaterMaster Floating Pump
-
Model Number:
0WM-6G
-
Product Name:WaterMaster Floating Pump
-
Manufacturer:
-
Series (3 Models):
PumpBiz 0WM-6G
WATERMASTER floating pump is the lightweight, reliable self-priming pump that floats. It has a heavy duty Kohler 6 h.p., 4 cycle engine and a 4 to 1 reduction. Floating pump provides 51,480 GPH. The screw on 12.5" impeller and gear will not slip off. The large inlets and specially designed impeller allows the pump to easily handle almost any liquid from water to sludge.
Drain sloughs and pot holes and put productive land back to work for you. Save time and fuel by working through low spots instead of around them. PAY FOR YOUR WATERMASTER PUMP IN JUST ONE YEAR WITH INCREASED PRODUCTION. It can also be used to drain sloughs and swamps. It is also ideal to fill dugouts and holding ponds for irrigation. You can also use to pump water for flood or trickle irrigation. Special soaker hose is available for irrigation.
Features:
- Screw on gear
- Complete drive in one assembly
- Big 6" discharge outlet
- Thrust ball bearings rated at over 10,000 hours service
- Unbreakable urethane impeller
- Tough reinforced fiberglass body
- Over 79 1"screen openings
- Extra large bronze bearings guide mainshaft top and bottomI. Urethane floatation foam
Larger Fuel Tank
A larger gas tank can be used with the WATERMASTER Floating, Self Priming Pump. A ( 2.4 - 6 U.S. gallon) tank can be placed on shore with a gravity fed hose connected to the carburetor on the engine. The existing gas tank will have to be disconnected to connect the new fuel line.
| Model Number | 0WM-6G |
|---|---|
| Series | WATERMASTER Floating Pump |
| Max Flow (GPM.) | 858 |
| Max Flow GPH | 51480 |
| TDH Maximum (Ft) | 31 |
| TDH Maximum (PSI) | 13 |
| Horse Power (HP) | 6 |
| Horsepower (IE .5, 1, 1.5, 20) | 6.0000 |
| Outlet Connection Type | Barb |
| Outlet (In.) | 6 |
| Wetted Materials | Epoxy coated, FRP |
| Motor | Gas Engine |
| Speed (RPM.) | 1000 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 110 |
| Max Particle Size (In) | 1 |
| Viscosity | Cream 16.50 cp 100.00 ssu |
| Mechanical Seal Type | Single |
| Other | Intake screen is FRP with 79 -1" holes. Screen is 4" x circumferance of float. Engine is Kohler heavy duty industrial engine (OHV). 1.5qt fuel tank. |
| Run Time (HR.) | 90 |
| Fuel Tank Size | 1.5 QT pumpiing around 77,220 gallons |
| Weight (Lbs) | 90.000000 |
| Warranty (YRS.) | 1 |
