My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 21-30 of 198

Set Descending Direction
per page
  1. AMT Pumps

    MSV3 1 HP 6 stage pump

    MSV3-6-3P

    25% Off Special Price $1,071.00 Regular Price $1,428.00

    1HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    1HP 230/460v Learn More
  2. Graymills Pumps

    Vertical CI Centrifugal Pump & Mtr

    TNW68F 1

    $2,017.99
    Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron...
  3. Graymills Pumps

    1 HP MVP Multi-stage coolant pump

    MVP4

    $1,575.71
    Coolant pump, MVP’s steady, pulsation-free coolant flow permits greatly increased feed rates while preventing thermal shock to cutting tools. The multi-stage construction offers the ability to cost-effectively match the pump to your application f...
    230/460v Learn More
  4. Tsurumi

    LB Heavy Duty Dewatering Pump

    LB-800_

    $743.00

    Heavy Duty Submersible Dewatering Pump. Tsurumi Submersible pump with top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Semi-open urethane impeller with ...

    1HP 230v/1 Learn More
  5. Barnes Pumps

    115 V .9 hp 4" Handling Pump

    4SE914L

    $2,510.00
    • 4" horizontal discharge handles up to 3" spherical solids
    • Motor sizes from .9 to 100 HP
    • Open and enclosed impellers, some with pump-out vains on backside. Delta impellers avaliable on some models
    • Volutes avaliable in both standard- effcincy ...
  6. FlexPump Trash Pump

    PortaPump water pump

    PP32

    $1,750.00

    PortaPump©

    Four Stoke Lightweight pump does NOT need to be primed. Simply submerse in water. For pumping waste water with ease from footings, trenches, pits, bunkers, sports fields and foundations. Made in USA.  For String Trimmer Pump attachmen...

    Honda 4-Cycle Gas dewatering Porta Pump Learn More
  7. Tsurumi

    Tsurumi pond pump

    50PN2.75S115

    $909.00
    Tsurumi Submersible Pond Fountain Pumps. 5520GPH, 1770 watts
    • Watertight Cable Entrance with Anti-wicking block.
    • Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
    • Built in motor protection
    • Continuous duty air filled copper...
    1HP 115v Learn More
  8. Tsurumi

    Fountain pump 1HP

    50PU2.75S

    $1,016.00

    Fountain pump 1HP, or submersible water feature. Residential, commercial, industrial sewage and wastewater. Semi-Vortex impeller and open inlet provide for many tough applications from wastewater to fountains and water features. Tsurumi Heavy Duty...

    1HP 115v Learn More
  9. Tsurumi

    Tsurumi pond pump 230v 1HP

    50PN2.75S230

    $909.00
    Tsurumi Submersible Pond Fountain Pumps. 5520GPH, 1770 watts
    • Watertight Cable Entrance with Anti-wicking block.
    • Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
    • Built in motor protection
    • Continuous duty air filled copper...
    1HP 230v Learn More
  10. Tsurumi

    1 hp Saltwater pump

    50TM2.75S 115v

    $1,543.00
    Saltwater pumps submersible Semi vortex.

    The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. there is both Manual and Automatic versions available in ...

View as List Grid

Items 21-30 of 198

Set Descending Direction
per page