Tsurumi pond pump
-
Model Number:
50PN2.75S
-
Product Name:Tsurumi pond pump
-
Manufacturer:
-
Series (19 Models):
Tsurumi 50PN2.75S
Tsurumi 50PN2.75S-63 Submersible Pond & Waterfall Pump – 1 HP, 115V, 2"
The Tsurumi 50PN2.75S-63 is a corrosion-resistant VANCS-series semi-vortex pump for ponds, waterfalls, effluent and wastewater.
WHAT IT'S GOOD FOR
• Ponds, waterfalls and fountains (white mineral oil in the seal chamber is safe for pond life)
• Residential, commercial and industrial effluent, wastewater and site drainage
• Chemical spill containment
• Raw water supply from rivers or lakes
KEY FEATURES
• Semi-vortex impeller passes solids and stringy material without clogging
• Stainless steel housing with fiberglass-reinforced plastic (FRP) impeller, volute and top cover for corrosion resistance
• White mineral oil in the seal chamber is safe for ponds and fish
• Dual inside mechanical seals with silicon carbide faces, protected by a lip seal
• Continuous-duty motor with built-in thermal and amperage-sensing protection
SPECIFICATIONS
Horsepower: 1 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 9.2 A at 115V
Discharge: 2" female NPT
Max flow: 92 GPM (5,520 GPH)
Max head: 55 ft
Max solids: 0.394"
Power cable: 32 ft
Operation: Manual
Max water temperature: 104°F (40°C)
Backed by Tsurumi's limited warranty: two years.
| Model Number | 50PN2.75S |
|---|---|
| Series | Waterfall Pond Fountain Pumps Tsurumi |
| Max Flow (GPM.) | 92 |
| Max Flow GPH | 5520 |
| TDH Maximum (Ft) | 55 |
| TDH Maximum (PSI) | 24 |
| Horse Power (HP) | 1 |
| Horsepower (IE .5, 1, 1.5, 20) | 1.0000 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 2 |
| Wetted Materials | 304SS, FRP |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 140 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Mechanical Seal | Yes |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | Total operating cost per / MO. @ BEP $64.46 (based on $.10 per kW HR and 24 hours per day, 7 days per week operation) |
| Approvals | ETL |
| Impeller Material | FRP, Semi-vortex solids handling |
| Cord Length (Ft.) | 32 |
| Motor Insulation | E |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | Japan |
| Weight (Lbs) | 36.000000 |
| Warranty (YRS.) | 2 |
Supporting Docs
Hot Buys
Pumps on a deep discount
