Tsurumi 100AB2.4S-62 Axial-Flow High-Volume Pump – 1/2 HP, 115V, 4"
-
Model Number:
100AB2.4S
-
Product Name:Tsurumi 100AB2.4S-62 Axial-Flow High-Volume Pump – 1/2 HP, 115V, 4"
-
Manufacturer:
-
Series (19 Models):
Fountain Pump 1/2HP 115v
Model Number
100AB2.4S
$1,226.50
Tsurumi 100AB2.4S
Tsurumi 100AB2.4S-62 Axial-Flow High-Volume Pump – 1/2 HP, 115V, 4"
The Tsurumi 100AB2.4S-62 is an axial-flow pump that moves large volumes of water at low lift. With a 4-inch discharge it is built for volume rather than lift – ideal for transferring water between ponds or lowering a flooded area quickly.
WHAT IT'S GOOD FOR
• Moving large volumes of water at low lift
• Pond and lake transfer, water features and flood water
• Residential, commercial and industrial wastewater
• Raw water supply from lakes or rivers
KEY FEATURES
• Axial-flow cast iron propeller moves high volumes at low head efficiently
• Non-toxic white mineral oil in the seal chamber
• Dual inside silicon carbide mechanical seals with a lip seal and replaceable stainless steel shaft sleeve
• Anti-wicking cable entry prevents water getting into the motor through a damaged cable
• Continuous-duty motor with built-in thermal protection; C3 bearings rated for a 60,000-hour B-10 life
SPECIFICATIONS
Horsepower: 1/2 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 7.9 A at 115V
Discharge: 4" male NPT
Max flow: 211 GPM (12,660 GPH)
Max head: 9 ft
Max solids: 0.315"
Power cable: 16 ft
Operation: Manual
Weight: 40 lb
Max water temperature: 104°F (40°C)
Backed by Tsurumi's limited warranty: two years.
| Model Number | 100AB2.4S |
|---|---|
| Series | Waterfall Pond Fountain Pumps Tsurumi |
| Max Flow (GPM.) | 211 |
| Max Flow GPH | 12660 |
| TDH Maximum (Ft) | 9 |
| TDH Maximum (PSI) | 4 |
| TDH BEP (FT.) | 6.000000 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5400 |
| Watts | 772.000000 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 4 |
| Wetted Materials | FRP |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Self Priming | Yes |
| Max Operating Temperature (F) | 140 |
| Viscosity | Water 1.00 cp 31.00 ssu |
| Mechanical Seal | Yes |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | Total operating cost per / MO. @ BEP $56.23 (based on $.10 per kW HR and 24 hours per day, 7 days per week operation |
| Impeller Material | CI, Axial Flow |
| Cord Length (Ft.) | 16 |
| Duty | Continuous |
| Drain | No |
| Port Rotation | Yes |
| Country of Manufacture | Japan |
| Weight (Lbs) | 85.000000 |
| Warranty (YRS.) | 2 |
Supporting Docs
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.
Hot Buys
Pumps on a deep discount
