My Cart

Tsurumi pond pump 230v 1HP

1HP 230v
Model Number
50PN2.75S-230
$909.00

Tsurumi 50PN2.75S-230

Tsurumi 50PN2.75S-63 (230V) Submersible Pond & Waterfall Pump – 1 HP, 230V, 2"

The Tsurumi 50PN2.75S-63 (230V) is a corrosion-resistant VANCS-series semi-vortex pump for ponds, waterfalls, effluent and wastewater. This is the 230V single-phase version of the 50PN2.75S.

WHAT IT'S GOOD FOR
• Ponds, waterfalls and fountains (white mineral oil in the seal chamber is safe for pond life)
• Residential, commercial and industrial effluent, wastewater and site drainage
• Chemical spill containment
• Raw water supply from rivers or lakes

KEY FEATURES
• Semi-vortex impeller passes solids and stringy material without clogging
• Stainless steel housing with fiberglass-reinforced plastic (FRP) impeller, volute and top cover for corrosion resistance
• White mineral oil in the seal chamber is safe for ponds and fish
• Dual inside mechanical seals with silicon carbide faces, protected by a lip seal
• Continuous-duty motor with built-in thermal and amperage-sensing protection

SPECIFICATIONS
Horsepower: 1 HP
Power: 230V, single-phase, 60 Hz
Full-load amps: 4.6 A at 230V
Discharge: 2" female NPT
Max flow: 92 GPM (5,520 GPH)
Max head: 55 ft
Max solids: 0.394"
Power cable: 32 ft
Operation: Manual
Max water temperature: 104°F (40°C)

Backed by Tsurumi's limited warranty: two years.

More Information
Model Number 50PN2.75S-230
Series Waterfall Pond Fountain Pumps Tsurumi
Max Flow (GPM.) 92
Max Flow GPH 5520
TDH Maximum (Ft) 55
TDH Maximum (PSI) 24
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 304SS, FRP
Elastomers / O-ring Buna-Nitrile
Voltage (V) 230
Voltage (Range) 220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor Hermetically Sealed
Speed (RPM.) 3450
Self Priming Yes
Max Operating Temperature (F) 140
Viscosity Milk 3.20 cp 40.00 ssu
Mechanical Seal yes
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Total operating cost per / MO. @ BEP $64.46 (based on $.10 per kW HR and 24 hours per day, 7 days per week operation)
Approvals ETL
Impeller Material FRP, Semi-vortex solids handling
Cord Length (Ft.) 32
Motor Insulation E
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture Japan
Weight (Lbs) 36.000000
Warranty (YRS.) 2

Supporting Docs

Supporting Docs
pdf
(Size: 2.88 MB) Extension: pdf
pdf
(Size: 29.45 KB) Extension: pdf
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.

Hot Buys

Pumps on a deep discount