Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Vortex pump w/ mechanical float .5hp
SEV412AT
$832.00Submersible NON-CLOG pump, 2" spherical solids handling. Includes PVC mechanical float tethered to pump 20 ft. cord. All cast iron, including impeller.Some sort of course screen should be used on top of the sump if large amounts or large deb...
-
Barnes Pumps
Vortex pump w/ mechanical float .5hp
SEV412A
$815.00Barnes sewage Submersible NON-CLOG vortex pump, 2" spherical solids handling. Includes PVC mechanical float switch for pipe mount20 ft. cord. All cast iron, including impeller.Some sort of course screen should be used on top of the sump if l...
-
Sta-Rite
STEP PLUS Filtered Effluent Pump
10DOM05121-01
Sta-Rite High-Head Filtered Effluent Pump. ST.E.P. Plus™.
- Superior draw-down capability to 4-1/2" vs. 13-1/2" on a standard NEMA 4"
- 25% Reduced AMP-draw 9.5 amps vs. 12.7 amps on a standard 4" NEMA
- Cooler and quieter operation - eliminates...
1/2HP 115v Learn More -
Tramco
Residential Sump pump
4400S-A36P
$2,915.00Tramco Vertical residential sump Pumps
Vertical sump pumps are true heavy duty designs for long life. 40 inch model with 1/2 hp 1725 rpm motor. Includes a strainer and pump mounting plate 20" diameter, discharge pipe and float switch. Designed fo...
-
Pedrollo Pumps
Sub. High Head, heavy duty
DH07A16A
$677.74Submersible water pump, extremely heavy duty design. Passage of suspended solid bodies up to 3/8”. For continuous duty: minimum immersion 8.5” from pump base. Solid cast iron body with 304 Stainless housing. Shaft has DOUBLE SEAL: mechanical seal... -
Pedrollo Pumps
Submersible High Head, heavy duty pump
DH05A16A
$677.74Submersible water pump, extremely heavy duty design. Passage of suspended solid bodies up to 3/8”. For continuous duty: minimum immersion 8.5” from pump base. Solid cast iron body with 304 Stainless housing. Shaft has DOUBLE SEAL: mechanical seal...1/2HP 115v Learn More