STEP PLUS Filtered Effluent Pump

1/2HP 115v

Model Number

10DOM05121-01

$992.07 $992.07 To see our price, add this item to your cart. You can always remove it later. What's this?

Sta-Rite 10DOM05121-01

Sta-Rite High-Head Filtered Effluent Pump. ST.E.P. Plus™.

Superior draw-down capability to 4-1/2" vs. 13-1/2" on a standard NEMA 4"
25% Reduced AMP-draw 9.5 amps vs. 12.7 amps on a standard 4" NEMA
Cooler and quieter operation - eliminates expensive "flow-inducer sleeves" as STEP20 requires
Can sit directly on bottom of basin, bottom inlet with flow through motor
UL, CSA Listed
Stainless steel and composite construction
Patented and proven SignaSeal™ staging
Exclusive STA-RITE dry-run capability
Enclosed and self-lubricated Nylatron® shaft-bearing resists wear from abrasives
Heavy 7/16" positive drive 300 Series stainless steel hexagonal shaft
Stainless steel intake screen - allows for .080" solids
Powered by STA-RITE motor: dry-wound, double ball-bearing, thermal over-load protected
Applications: Effluent, Cistern, Aeration, and Irrigation
Minimum Diameter: 4"
Power Cord: 10 ft., 600V, SJOW jacketed, 2-wire with ground

More Information
Model Number	10DOM05121-01
Series	Filtered Effluent STEP Pumps Septic Tank
Max Flow (GPM.)	10
Max Flow GPH	600
TDH Maximum (Ft)	225
TDH Maximum (PSI)	97
Horse Power (HP)	1/2
Horsepower (IE .5, 1, 1.5, 20)	0.5000
Outlet Connection Type	FNPT
Outlet (In.)	1.25
Wetted Materials	SS-Plastic
Elastomers / O-ring	Buna-Nitrile
Voltage (V)	115
Voltage (Range)	110-120
Phase (Ø)	Single (1)
Motor Frequency	60
Motor	Hermetically Sealed
Self Priming	No
Max Operating Temperature (F)	140
Viscosity	Milk 3.20 cp 40.00 ssu
Stages	6
Shaft	304SS
Mechanical Seal Face	Carbon-ceramic
Mechanical Seal Type	Single
Motor Bearings	Ball
Impeller Material	FRP
Cord Length (Ft.)	10
Drain	Yes
Port Rotation	Yes
Country of Manufacture	United States
Weight (Lbs)	20.000000
Warranty (YRS.)	1
GPM Of Water At 100 Feet Of Head	12
GPM Of Water At 150 Feet Of Head	10
GPM Of Water At 200 Feet Of Head	5