Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Effluent 1 HP
EH1022L
$2,257.70Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch. -
Myers Pumps
Effluent and Drain Water Pump
ME40MC-21
$784.00ME40 Series 4/10 HP Effluent and Drain Water Pumps.
- Two vane thermoplastic impeller design provides maximum dosing efficiency.
- Enclosed design for high efficiency pumping.
- Eliminates possibility of jamming between impeller and volute.
- Pass...
-
Myers Pumps
Explosion Proof Sump Pump
SX50H-01 208V
Myers SX50h is a rugged 1/2HP Explosion Proof Submersible sump pump high head designed for many commercial, municipal or industrial applications. The SX50 is CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations....
208v/1 1/2HP Learn More -
Barnes Pumps
3SEV submersible trash pump
3SEV524DS
$2,251.00Submersible trash pump. Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 6.3 -
Barnes Pumps
Submersible Grinder Pump
SGVF2022L
$7,695.78Submersible Grinder Pump 110609 2HP 230v
Rugged and reliable SGV Series grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects such as plastic, rubber, disposable diapers, towels and clo...
230v/1, 2hp Learn More -
Barnes Pumps
3SEV Vortex, Double Seal
3SEV594DS
$2,634.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 3.7/3.8 -
Myers Pumps
High Flow Submersible Effluent Pump
ME3F-21
$691.00High Head (ME3H) and High Flow (ME3F) Submersible Effluent Pumps. Durable motor delivers years of reliable service. Engineered for maintenance-free operation.
- Oil-filled 1550 RPM motor for maximum heat dissipation and continuous bearing lubricat...
-
Power-Flo Pumps
3 HP Submersible Sewage Pump
PFSE3024
$4,961.68Submersible NON-CLOG pump, 2-1/2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled Silicon Carbide. 25 Ft. Cord. Pressure grommet for sealingand strain relief. Does not include float switch. All cast...230/1 Learn More -
Barnes Pumps
3SEV Vortex, Double Seal
3SEV724DS
$2,813.00Submersible non-clog sewage pump designed for typical raw sewage applications.FLA 7.1 -
Myers Pumps
High Temperature Sump Pump 4/10HP
S40HT-11P
$1,487.00Designed for hot water applications up to 194°F. All cast iron construction with stainless steel fasteners. Pumping applications include boiler blowdown pits, condensate pits and hot water transfer. Maintenance-free Operation. For higher head (ps...4/10HP115v Automatic Learn More
