Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Barnes Pumps
Effluent Pump Step-DS 480v
STEP542DS
$2,445.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Sewage pump, Sgl seal
3SE544L
$2,128.00Submersible non-clog sewage pump designed for typical raw sewage applications. Also used in high flow submersible dewatering applications like parking lot drains and commercial sites. Outboard seal. 460V three phase.Replace 2P542
460v 3" 1/2HP Learn More -
Barnes Pumps
Vortex pump .5hp
2SEV542L
$2,225.60Barnes sewage 2SEV submersible NON-CLOG vortex pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP, 460V Learn More -
Barnes Pumps
Effluent Pump man 480v
EH542L
$2,117.00Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. Due to its motor 3450RPM, this pump is much h...
460v 1/2HP for solids up to 3/4", High head Learn More -
Barnes Pumps
Effluent Pump man 480v
EH542DS
$2,541.24Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor housing is oil-f... -
EBARA Pumps
Stainless Steel Dewatering Pump
EPD-5MT4
$1,454.001/2HP Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump....1/2HP 460V HS Learn More -
Barnes Pumps
Effluent Pump Step-SS-480v
STEP542SS
$2,055.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Submersible non-clog sewage pump
2SEV544DS
$2,645.04Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.- Double Seal
- Vortex (non-clog) Impeller
- Handles 2" sp...
104926 Learn More -
Barnes Pumps
Submersible non-clog sewage pump
2SEV542DS
$2,362.56Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.- Double Seal
- Vortex (non-clog) Impeller
- Handles 2" ...
-
Webtrol
Stainless Steel Dewatering Pump
EPD5MT4
$2,049.84The Webtrol Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. Th...1/2HP 460V Learn More