My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 41-50 of 111

Set Descending Direction
per page
  1. EBARA Pumps

    SS sewage pump

    50DWXAU6.75S

    $1,843.00

    Stainless Steel sewage pump 1HP 115v single channel / non-clog impeller. Automatic w/ float switch. Submersible sewage Pump 

    EBARA Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimen...

    1HP 115V HS Learn More
  2. EBARA Pumps

    SS sewage 1hp

    50DWXU6.754

    $1,733.00

    SS sewage pump vortex / non-clog impeller, submersible.

    No float switch. 1HP 460v three phase Ebara stainless steel submersible dominator series of sewage pumps are made entirely of 304 stainless steel and have 25' power cords. 

    EBARA Dominator ...

    1HP 460V HS Learn More
  3. EBARA Pumps

    SS sewage 1hp

    50DWAU6.75S

    $1,552.19

    SS sewage pump single channel / non-clog impeller. Automatic w/ float switch. Single Channel Impeller 

    EBARA Dominator is superior in dependability and efficiency. High-quality stainless steel components are stronger, dimensionally consistent and...

    1HP 115V HS Learn More
  4. Power-Flo Pumps

    Non-Clog Submersible w/o float

    PFSE1074

    $1,902.75
    Submersible NON-CLOG pump, 2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled carbon. 15 Ft. Cord. Pressure grommet for sealingand strain relief. All cast iron, including impeller, 2 vane open typ...
  5. Barnes Pumps

    Submersible Effluent Pump

    EHH1042L

    $1,667.34
    EHH Series heavy duty effluent submersible pump high head or discharge pressure. New Old Stock. MANUAL OPERATION, no float switch, order seperately.
  6. Power-Flo Pumps

    Non-Clog Submersible w/o float

    PFSE1094

    $2,239.27
    Submersible NON-CLOG pump, 2" spherical solids handling. Submersible sewage pump. Inboard, Single mechanical seal, Oil Filled carbon. 15 Ft. Cord. Pressure grommet for sealingand strain relief. All cast iron, including impeller, 2 vane open type,...
  7. Tsurumi

    Tsurumi Submersible Sand Trash Pump HS3.75S-61

    HS3.75S

    $699.00

    Tsurumi Submersible Sand Trash Pump HS3.75S-62.

    Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Flo...

    1HP 115v Learn More
  8. Barnes Pumps

    3SEV High Flow sewage pump

    3SEV1044L

    $2,431.00
    High Flow sewage pump. Submersible non-clog sewage pump designed for typical raw sewage applications.
    1HP 480/3 Learn More
  9. Myers Pumps

    Submersible Sewage Pump

    WHR10-21C

    $2,545.00
    This pump is designed for use in light commercial and residential raw sewage applications. This pump will pass a full 2-inch sphere. The recessed vortex impeller provides an unobstructed passage in the volute case which allows these pumps to ...
    OBSOLETE Learn More
  10. Barnes Pumps

    Effluent 1 HP

    EH1022L

    $2,110.00
    Submersible Effluent Pump will handle up to 3/4" spherical solids. Cast Iron housing, PP impeller is a 3 vane open style with backside pump out vanes. Motor is PSC with overload protection. 8.1 full load amps. No float switch.
View as List Grid

Items 41-50 of 111

Set Descending Direction
per page