My Cart

Vertical Pumps

Designed and meant to be used as a vertically mounted assembly. Typical vertical pumps include or have as an option some sort of mounting plate. Others are meant to be completely submersed in the liquid. Vertical pumps can have either a relatively short shaft and therefore be canti-levered from the motor allowing for them to operate without bearings and to run-dry. Others have some sort of bearings or bushings, usually a non-metallic type, somewhere along the shaft to minimize shaft run-out and whip. This category also includes those pumps, which are hermetically sealed pump and motor units, suitable for being completely submersed in the liquid. Unlike horizontals, vertical pumps rarely need to be primed, the impeller and casing simply need to be submerged during start-up. Here considerations are usually on the controlling of the pump on-off cycles with some sort of float switch.
View as List Grid

Items 1-10 of 227

Set Descending Direction
per page
Page
  1. Tsurumi

    High Volume submersible Tsurumi

    NK3-22L

    $3,087.00
    Electric submersible Tsurumi . Tsurumi Submersible Pumps -Heavy duty, high head dewatering pump. Designed for handling abrasive material with minimal wear. Rubber wear plate is integral part of casing. Top discharge provides maximum motor cooli...
    3HP 220v Learn More
  2. EBARA Pumps

    Stainless Steel sewage 1hp

    50DWXU6.752

    $1,733.00

    Stainless Steel sewage pump, submersible

    vortex / non-clog impeller. No float switch. 1HP 230v three phase Ebara 304SS submersible dominator series of sewage pumps are made entirely of 304 stainless steel and have 25' power cords. These commercia...

    1HP 230V HS Learn More
  3. Myers Pumps

    Simplex Explosion Proof Sump Pump

    SX50-21

    $4,347.00

    Myers SX50 is a rugged 1/2HP Explosion Proof Submersible sump pumps designed for many commercial, municipal or industrial applications. The SX50 is CSA listed with construction for use in Class 1, Division 1, Group D hazardous locations. These pum...

    230v/1 1/2HP Learn More
  4. Barmesa Pumps

    Grinder Pump 5HP

    BGPH502DS

    $5,652.00

    Grinder Pump by Barmesa. Rugged and reliable grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects sewage. Capacitor and start relay are required separately. Therefore use a control ...

    5HP 230v/1 double seal Learn More
  5. Barmesa Pumps

    Submersible Non Clog Sewage Pump

    2BSE52SS

    $1,129.00

    Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...

    230v/1 1/2HP 2" Learn More
  6. Tsurumi

    1 hp Saltwater pump

    50TMA2.75

    $1,910.00
    Saltwater pumps submersible Semi vortex.

    The all wetted parts are made of titanium, Far stronger than stainless steel, titanium will never rust in sea water or under similar conditions. Automatic version. Float is internally wired.

    APPLICATIO...
    230 or 460V Automatic Learn More
  7. AMT Pumps

    MSV3 3 HP 19 stage pump

    MSV3-19-1P

    23% Off Special Price $1,484.56 Regular Price $1,928.00

    3HP Multistage Vertical booster pump, 19 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations includ...

    3HP 230v Learn More
  8. Tsurumi

    Tsurumi Submersible Pump

    HS2.4S-62-230

    $335.00

    230v Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater fl...

    2" 180GPH 1/2HP 230v Learn More
  9. Barmesa Pumps

    Grinder Pump 3HP

    BGP302DS

    20% Off Special Price $4,500.80 Regular Price $5,626.00

    Grinder Pump by Barmesa. Rugged and reliable grinder cutter pumps provide continuous, maintenance-free submersible operation while effectively handling objects sewage. Capacitor and start relay are required separately. Therefore use a control pane...

    3HP 230v/1 double seal Learn More
  10. Barmesa Pumps

    High pressure septic pump

    BPSTEP1022

    $1,894.00
    STEP Submersible High Head Effluent, septic tank pump. S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent solids applications for the long term. Rug...
    1HP 230v 2" High Head, Manual Learn More
View as List Grid

Items 1-10 of 227

Set Descending Direction
per page
Page