My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 1071

Set Descending Direction
per page
Page
  1. FTI DB5.5 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    DB4 Magnetic pump PVDF Explosion proof

    DB4V-M530
    $1,549.30
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/3hp 1phase Explosion proof Learn More
    Add to Wish List Add to Compare
  2. DB5.5v-m613 Finish thompson pump

    Finish Thompson Pumps (FTI)

    DB5.5V-M613 pump Kynar

    DB5.5V-M233
    $961.63
    Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-couple...
    1/4 Hp 115V, TEFC, Kynar Learn More
    Add to Wish List Add to Compare
  3. 369D-98_35.gif

    AMT Pumps

    Cast Iron 1hp Pump

    370E-95
    $672.00
    Cast Iron 1hp Pump Designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor.

    See Curve E

    Serie...
    115/230v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  4. 4265-98 amt 316ss chemical pump

    AMT Pumps

    Heavy Duty High Head Centrifugal

    4265-98
    $4,198.00
    AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, heating and cooling, recirculation, booster service and other industrial applications. Semi-open impeller features self-cleaning ability that makes the unit ...
    230v 10HP TEFC Learn More
    Add to Wish List Add to Compare
  5. March TE-7.5P-MD-1ph Magnetic pump 2HP PP Magnetic Pump

    March Pumps

    2HP PP Magnetic Pump

    TE-7.5P-MD 1PH 2HP
    $3,799.00

    SALE March Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of glass filled Polypro. This makes them ideal for corrosive chemical applications. Chemical pumps for industrial process applicatio...

    115/230v 2HP PolyPro Learn More
    Add to Wish List Add to Compare
  6. 489e-95 AMT pump

    AMT Pumps

    1HP Centrifugal Pump

    489E-95
    $768.00

    AMT - 489E-95: 1HP Centrifugal Pump.

    Replaced by 5022-95

    1HP Cast Iron straight centrifugal pump is designed for continuous duty high pressure OEM, industrial / commercial and general service applications including circulation, chemical processi...

    115/230v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  7. Barmesa 62070062 IB1.5-5-2-1 Center Line Discharge

    Barmesa Pumps

    IB1.5-5-2-1 Center Line Discharge

    62071062
    $2,648.00

    High head, Center Line Discharge End-Suction Centrifugal Pump. Impeller trims are available, see performance chart.

    Commercial duty pumps featuring centerline discharge for easy inline plumbing and retrofit to other OEM pumps often used on chille...

    5HP 230v/1 Learn More
    Add to Wish List Add to Compare
  8. AMT - 282C-X8: Explosion Proof SS self priming Pump

    AMT Pumps

    Explosion Proof SS Centrifugal Pump

    282C-X8
    $2,553.50

    Explosion Proof Motor Stainless Steel Self-priming Centrifugal pump is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant...

    115/230v 1HP EXP SS Learn More
    Add to Wish List Add to Compare
  9. 489e-98 AMT SS pump explosion proof

    AMT Pumps

    Centrifugal Pump Explosion Proof

    489E-X8
    $2,194.63

    Obsolete

    Explosion Proof straight centrifugal pump is designed for continuous duty low pressure flammable service applications including circulation, chemical processing, liquid transfer, cooling, hazardous locations. Cannabis Hemp CBD distillate...

    OBSOLETE Learn More
    Add to Wish List Add to Compare
  10. Finish Thompson FTI DB8 kynar PVDF pump

    Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M227
    $1,380.12
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 230/460v TEFC Kynar Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 11-20 of 1071

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Single (1) Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 936 items
  2. Magnetic Coupled (Seal-less) Pumps 135 items
Voltage (Range)
  1. 110-120 117 items
  2. 208-230/460//190-220/380-415 2 items
  3. 208-240 16 items
  4. 220-240/460-480 3 items
  5. 110-120/220-240 711 items
  6. 220-240 207 items
  7. 208-240/460 3 items
  8. 12/24/36 VDC 10 items
Horse Power (HP)
  1. 1/4 9 items
  2. 1/3 42 items
  3. 1/2 154 items
  4. 2/3 1 item
  5. 3/4 167 items
  6. 1 148 items
  7. 1 1/2 116 items
  8. 2 108 items
  9. 2 1/2 12 items
  10. 3 88 items
  11. 4 1 item
  12. 5 54 items
  13. 7 1/2 23 items
  14. 10 29 items
  15. 15 1 item
inlet size
  1. Less than 1" 126 items
  2. 1" 136 items
  3. 1 ¼" 243 items
  4. 1 ½" 243 items
  5. 2" 121 items
  6. 2 ½" 24 items
  7. 3" 16 items
  8. 4" 9 items
  9. 6" 1 item
PRICE $
$  -  $
Motor
  1. ChemDuty 1 item
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 46 items
  3. EXP (C 1, Gp C/D) 34 items
  4. EXP (C 1, Gp D) 1 item
  5. Hermetically Sealed 28 items
  6. ODP 528 items
  7. Open 26 items
  8. TEFC 373 items
  9. TENV 12 items