FTI DB8 pump
-
Manufacturer:
-
Series (37 Models):
-
Product Name:FTI DB8 pump
-
Model Number:DB8V-M227
1/2HP 230/460v TEFC Kynar
Model Number
DB8V-M227
$1,380.12
Finish Thompson (FTI) DB8V-M227
FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive
pump—the new standard for high hydraulic efficiency
and corrosive fluid handling. With computer design-aided magnetic
flux and computational fluid dynamics technology, the DB series
packs all the high-pressure, fluid-handling punch
you’d expect from a Finish Thompson pump.
DB Magnetic Chemical Pump, sealless magdrive pump like no other.
- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Kynar PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation with IEC motor
- Back pullout design
- Mounts to NEMA and IEC motor frames with feet
- Replaceable shaft
- ISO 1940 G2.5 balancing
- CE certified/ATEX available
- Working pressure up to 90 psi (6.2 bar) or 50 psi (3.5 bar) with Gylon® gasket
- Specific gravity over 1.8
- Viscosity up to 150 cP
- Polypropylene—180o F (82o C)
Used for: Chemical processing, Plating, Water and wastewater, Large Aquariums, Electronics,Pharmaceuticals, Wet scrubber, Pulp and paper, Heat exchanger
| Model Number | DB8V-M227 |
|---|---|
| Series | DB Magnetic Chemical Pump FTI |
| Max Flow (GPM.) | 60 |
| Max Flow GPH | 3600 |
| TDH Maximum (Ft) | 45 |
| TDH Maximum (PSI) | 22 |
| Horse Power (HP) | 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
| Inlet Connection Type | FNPT |
| Inlet (In.) | 1.5 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 1 |
| Wetted Materials | Kynar-PVDF CF |
| Elastomers / O-ring | FKM |
| Voltage (V) | 208-230/460 |
| Voltage (Range) | 208-240/460 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 1.6/0.8 |
| Motor | TEFC |
| Speed (RPM.) | 3450 |
| Motor Frame | 56C |
| Self Priming | No |
| Max Operating Temperature (F) | 220 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | Ceramic |
| Mechanical Seal | No |
| Motor Bearings | Ball |
| Impeller Number (In.) | 1 |
| Other | For liquids of high SG see impeller trim chart or use a motor of higher HP. |
| Rotation | CW motor side |
| Pump Bearing | Carbon/graphite |
| Impeller Material | PP, enclosed |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | Yes |
| Port Rotation | Yes |
| Country of Manufacture | United States |
| Weight (Lbs) | 35.000000 |
| Warranty (YRS.) | 5 |
>
FTI is a leading world class pump manufacturer in Erie, PA. FTI has built its product lines around cutting edge design and manufacturing processes culminates in their having ISO certification.
You May Be Interested In
