My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 167

Set Descending Direction
per page
Page
  1. Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M227

    $1,380.12
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 230/460v TEFC Kynar Learn More
  2. AMT Pumps

    Stainless Steel Centrifugal Pump 3 phase

    489B-98

    $1,390.00

    Stainless Steel High Head Centrifugal Pumps. OBS see alternates. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation...

    230/460v 1-1/2HP TEFC Learn More
  3. AMT Pumps

    High Pressure Bronze Centrifugal Pump

    489F-97

    $1,357.20
    High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure ...
    208-230/460v 1HP ODP Learn More
  4. American Stainless

    SS pump & motor

    C14622B2T3

    $828.41
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...
    2HP 208-230/460V TEFC Learn More
  5. March Pumps

    March Ryton Magdrive Pump

    TE-7R-MD 3PH 3/4HP

    10% Off Special Price $1,028.70 Regular Price $1,143.00

    March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...

    3/4HP 230/460v Learn More
  6. Finish Thompson Pumps (FTI)

    FTI DB6 pump

    DB6HP-M227

    $1,325.00

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...

    1/2HP 230/460v PolyPro Learn More
  7. AMT Pumps

    MSV1 2HP 15 stage pump

    MSV1-15-3P

    10% Off Special Price $1,482.30 Regular Price $1,647.00

    Multistage Vertical booster pump. Commercial / industrial centrifugalpumps are non-self-priming (gravity feed)units designed to handle high-pressure lowflow liquid transfer applications where nosuction lift is required. Typical installations inclu...

    2hp, 208-230V/460v Learn More
  8. AMT Pumps

    MSV3 1 HP 6 stage pump

    MSV3-6-3P

    25% Off Special Price $978.00 Regular Price $1,304.00

    1HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    1HP 230/460v Learn More
  9. MTH Pumps

    MTH Turbine Pump 1/2HP

    E41DSSPSXSAXX

    $3,610.31
    MTH pump. Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleu...
    1/2hp SS 230/460v Learn More
  10. MP Pumps

    HTO 120 Pump Tempuflo

    30884

    $3,900.00

    Centrifugal Hot Oil Pump up to 650F

    with Vertical discharge Features:

    • Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which couples the unit to the shaft of a c-frame motor
    • Standard carbon/ceramic mechanical seal with FK...
    5.96" imp. 5HP 230/460v Learn More
View as List Grid

Items 1-10 of 167

Set Descending Direction
per page
Page