My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 40

Set Descending Direction
per page
Page
  1. March Pumps

    MAG Pump 1/20HP

    LC-3CP-MD 115V

    $462.00

    March magnetic pump, submersible or open air. March Seawater Circulation Pumps

    Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. They are rated up to 10GPM (33LPM) flow and for heads u...

    submersible or open air 115v Learn More
  2. PumpBiz

    Fountain Pond Pump 1/2hp Brass

    PFU51

    $1,804.00

    Submersible brass pond pumps specially designed for use in decorative water fountain displays.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharge can rotate 90ï½°; ...

    115v 1/2HP Learn More
  3. Little Giant Pumps

    PE-2H

    518400

    $166.77

    Epoxy encapsulated motor n 12.2' maximum lift n 47 watts n 1/4" MNPT discharge n Thermal overload protection n For submersible use only

    • 6' power cord w/o plug
    • Epoxy encapsulated motor
    • Nylon volute, impeller & screen
    • Conduit fitting for mount...
    PE-2 Learn More
  4. Little Giant Pumps

    PE-2.5F

    518600

    $226.72
    1/28 hp epoxy encapsulated, direct drive motor Designed for continuous duty, submersible use only Glass-filled polyester housing Polypropylene volute Fluoroelastomer (FKM) shaft seal Snap off screen covers intake cCSAus listed.
    • 6' power c...
  5. AMT Pumps

    Electric Submersible Shredder Pump

    576E-95

    $3,304.00

    Electric Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Electric Submersi...

    460v/3 5HP 4" SH4B3-E5 gorman rupp Learn More
  6. PumpBiz

    Fountain pump 1hp Brass

    PFU102

    $2,200.00

    Submersible Pond Fountain pumps specially designed for use in decorative water fountain displays and as waterfall pump.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Dis...

    230v /1 1HP Learn More
  7. PumpBiz

    Pond pump 1/3hp

    PFU31

    $2,223.00

    Waterfall Pump. Commercial pond Submersible pumps specially designed for use in decorative water fountain displays.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharg...

    115v fountain pump 1/3HP Learn More
  8. Barnes Pumps

    Fountain Pond Pump 1/2hp

    SFU51

    $3,037.00

    Submersible pond pumps specially designed for use in decorative water fountain displays.

    Brass construction, 4 and 6 vane open impeller. 304 stainless steel screen with screen area of 264 sq. in. wrap around. Discharge can rotate 90ï½°; 1-1/4"...

    115v 1/2HP Learn More
  9. March Pumps

    24vDC submersible pump

    893-06 24VDC

    $296.00

    24vdc submersible pump.

    Submersible Designed to operate at 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps a...

    24VDC Learn More
  10. March Pumps

    MAG Pump Brushless 12V

    893-09 12V DC

    $384.00

    Submersible Designed to operate at 12 volts DC,

    Submersible model. March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). Uses: Submersible. 18" wi...

    Submersible EBM Papst Motor Learn More
View as List Grid

Items 1-10 of 40

Set Descending Direction
per page
Page