PE-2H
-
Manufacturer:
-
Series (5 Models):
-
Product Name:PE-2H
-
Model Number:518400
PE-2
Little Giant 518400
Epoxy encapsulated motor n 12.2' maximum lift n 47 watts n 1/4" MNPT discharge n Thermal overload protection n For submersible use only
- 6' power cord w/o plug
- Epoxy encapsulated motor
- Nylon volute, impeller & screen
- Conduit fitting for mounting
- Submerged use only in parts washers
- FKM shaft seal
- UR & C-CSA for PJQU solvents
- 170 GPH @ 1'
CAUTION: the low flash point of these combustible liquids does present a moderate fire hazard. Operating the pump fully submerged offers added protection from fire risk. For other solvent handling precautions, consult the material safety data sheet (OSHA-20 form, or equivalent), for the solvent used.
Use only UL approved Metal Parts Cleaning Solvents. The use of fluids such as gasoline, and lower flash point solvents is dangerous and may cause explosions of fire. Solvents other than UL approved metal parts cleaning solvents will void the warranty of this product.
| Model Number | 518400 |
|---|---|
| Series | Specialty Pumps by Little Giant |
| Max Flow (GPM.) | 5 |
| Max Flow GPH | 300 |
| TDH Maximum (Ft) | 12 |
| TDH Maximum (PSI) | 5 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 0.25 |
| Wetted Materials | Aluminum, Nylon, Polyester |
| Elastomers / O-ring | FKM |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 0.8000 |
| Motor | Hermetically Sealed |
| Self Priming | Yes |
| Max Operating Temperature (F) | 140 |
| Max Particle Size (In) | 3.0000 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Mechanical Seal | LIP SEAL |
| Mechanical Seal Type | Double |
| Drain | Yes |
| Port Rotation | Yes |
| Weight (Lbs) | 5.000000 |
| Warranty (YRS.) | 1 |
>
You May Be Interested In
