My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 135

Set Descending Direction
per page
Page
  1. Berkeley Pumps

    B2ZQLS-18 High Pressure pump Engine Driven

    B70368

    $9,694.23

    OBSOLETE

    High Pressure pump Engine Driven .

    compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either high pressure fire irrigation or hig...

    OBSOLETE Fire pump Berkeley 18HP Electric start Learn More
  2. Berkeley Pumps

    B11/2ZQLS-18 High Pressure pump Engine Driven

    B70287

    $11,825.00

    High Pressure pump Engine Driven .

    compact, designed with a minimum number of parts and no extra bearings to lubricate or replace. There is no coupling to maintain or align. Ideally suited for either high pressure fire irrigation or high flow was...

    Fire pump Berkeley 18HP Electric start Learn More
  3. Gorman-Rupp Pumps

    Honda GX160 High Pressure water pump

    2P5XHR

    $1,755.00

    Honda High Pressure water pump by Gorman-Rupp AMT IPT 2P5XHR. 

    High Head Pump, Die-cast Aluminum construction powered by a Honda GX160 commercial grade engine. Made in America.

    Self-Priming Engine Driven Pump

    With the GX Honda gas engine poweri...

    Honda GX160 2" Learn More
  4. MP Pumps

    FM30 Pump w/ 18HP Engine

    39143

    $8,280.00

    Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...

  5. Riverside

    Homelite Trash pump 3" TP3B

    L1537Z

    $1,860.00
    Trash Pumps are used where water containing solids such as sticks, stones, mud, sand, gravel and other foreign material is present. Homelite is original name for these trash pumps which are now made under the Riverside brand. Trash pumps have t...
    3" 8HP Briggs Vanguard Learn More
  6. MP Pumps

    Flomax 15 Pump End Only

    21372

    $1,480.00

    Flomax 15 PPK are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump End Only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. see fl...

    Engine Mount 3" CI Learn More
  7. MP Pumps

    FM 8 w/ Engine

    29635

    $2,010.00
    Flomax 8 are self-priming pumps, pipe size 2" NPT. Gas Engine Driven w/ 5 HP Honda
    5HP Honda Learn More
  8. MP Pumps

    FM 15 Bronze Pump End Only

    21371

    $6,410.00
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump end only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. See fl...
  9. Riverside

    3.5 HP Briggs & Stratton Gas powered Centrifugal Pump

    S2B

    $1,059.00
    Centrifugal pumps are used where maximum head, fast priming, and acombination of high volume and pressure are required. Centrifugal pumpscan handle small quantities of solids, up to 10% by volume.The S2B and S2H feature a sand cast aluminum housi...
  10. Riverside

    5.5 HP Honda GX 160 Gas powered Centrifugal Pump

    S2H

    $1,289.00
    Centrifugal pumps are used where maximum head, fast priming, and acombination of high volume and pressure are required. Centrifugal pumpscan handle small quantities of solids, up to 10% by volume.The S2B and S2H feature a sand cast aluminum housi...
View as List Grid

Items 1-10 of 135

Set Descending Direction
per page
Page