Flomax 15 Pump End Only
-
Manufacturer:
-
Series (21 Models):
-
Product Name:Flomax 15 Pump End Only
-
Model Number:21372
Engine Mount 3" CI
MP 21372
Flomax 15 PPK are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump End Only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. see flow curve for 3600 RPM. Often used with Honda GX390 gas engine. Note that with the optional impeller trim of 5.5" diameter this pump requires only 5HP. Hydro-seeding, fuel oil and other non-flammable liquids. msg hydroseeder hs500.
Features:
Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25' suction lift |
Uses a 1" diameter keyed engine shaft.
Also available in a double seal, grease packed version for HDD
Model Number | 21372 |
---|---|
part number | MP21372 |
Series | Flomax 15 Self Priming pump |
Max Flow (GPM.) | 265 |
Max Flow GPH | 15900 |
TDH Maximum (Ft) | 145 |
TDH Maximum (PSI) | 63 |
HP Required | 13 |
Inlet Connection Type | FNPT |
inlet size | 3" |
Inlet (In.) | 3 |
Outlet Connection Type | FNPT |
Outlet (In.) | 3 |
Wetted Materials | Cast Iron |
Elastomers / O-ring | FKM |
Motor | Gas Engine |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Suction Lift (FT.) | 25 |
Max Operating Temperature (F) | 120 |
Max Particle Size (In) | .62 |
Viscosity | Cream 16.50 cp 100.00 ssu |
Shaft | 416SS |
Mechanical Seal | FKM |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Impeller Size (IN.) | 6.000000 |
Coupling | Y |
Other | For use with engines that have a 1" crankshaft. 5 blade impeller available for higher flows, Baseplate shown above is optional, Double seal available for dry run applications, Hydraulic motor .73 cu. in. |
Impeller Material | CI, semi-open |
Drain | Yes |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 78.000000 |
Warranty (YRS.) | 1 |