My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 81-90 of 137

Set Descending Direction
per page
  1. March Pumps

    12v Bronze Circulating pump

    809-BR-HS 12VDC Brush

    $576.00

    12v Pump with Inline connections. The ultimate in reliability in circulating pumps for industrial / hydronic / solar / marine applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, ...

    Inline connections High speed motor Learn More
  2. March Pumps

    Self prime SP-TE-7K-MD 3P

    SP-TE-7K-MD 3PH 1HP

    $3,030.00
    KYNAR Chemical magnetic pump March pump Series 7 self-priming magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors. Old 0155-0188...
    230/460v 1HP Kynar Learn More
  3. March Pumps

    316SS Magdrive Pump

    TE-7S-MD 3PH 1HP

    $3,029.63
    Stainless March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors.
    • Applications:
      • Rapid prototype clean station ...
    1HP 230/460v Stainless Learn More
  4. March Pumps

    Magnetic coupled pump

    AC-5C-MD 230V

    $708.75

    Polypro magnetic coupled pump. Motor is ODP 230 single phase. 

    AC-5C-MD Magnetic Drive Pump include chemical recirculation, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioner...

    230v/1 Learn More
  5. March Pumps

    Stainless Beer Pump

    815-SS-C 115V

    $511.88
    March Pump's industrial 815-SS-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maxi...
    Beer / Brewing / homebrew / chugger Learn More
  6. March Pumps

    Stainless Beer Pump

    815-SS 115V

    $533.25
    March Pump's 815-SS Beer Pump is an American manufactured seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or ar...
  7. March Pumps

    Magnetic Submersible Pump

    LC-5C-MD 115V

    $1,764.00

    Submersible Polypro magnetic coupled pump. Motor is Submersible OR open air cooled (maroon) 115 single phase. 6FT SJT line cord and plug. 250 watt motor. Some of the pumped fluid is recirculated back through the seal motor.

    Ceramic Magnet Exposed

  8. March Pumps

    316 Stainless Pump

    TE-8S-MD 3PH 5HP

    $11,718.00
    March Series 8 chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult liquids, such as strong halogen ...
  9. March Pumps

    316 Stainless Pump

    TE-8S-MD XP 3PH 5HP

    $12,901.50

    Explosion Proof March Series 8 Stainless Steel chemical pumps for industrial process applications, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar & 316 stainless steel, are the ideal choice for handling difficult liq...

    5HP Explosion proof Learn More
  10. March Pumps

    Ryton mag pump 1/15hp

    TE-MDX-MT3 1PH

    $973.13

    TE-MDX-MT3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.

    Impeller PN 0135-0113-0200

    Motor is Totally Enclosed Fan Cooled - TEFC (not Explosion Proof ...

    115v TEFC Learn More
View as List Grid

Items 81-90 of 137

Set Descending Direction
per page