My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 51-60 of 137

Set Descending Direction
per page
  1. March Pumps

    24v pump circulation 24V DC

    893-08

    $427.50

    24v Air cooled pump.

    Designed to operate 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps are capable of serv...

    24vdc Brushless Learn More
  2. March Pumps

    March 12vdc Pump submersible

    893-04 12VDC

    $366.75

    March 12vdc submersible pump.

    Submersible Designed to operate at 12 DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps a...

    12v DC sub Learn More
  3. March Pumps

    24vDC submersible pump

    893-06 24VDC

    $333.00

    24vdc submersible pump.

    Submersible Designed to operate at 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps a...

    24VDC Learn More
  4. March Pumps

    MAG Pump Brushless 12V

    893-09 12V DC

    $427.50

    Submersible Designed to operate at 12 volts DC,

    Submersible model. March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). Uses: Submersible. 18" wi...

    Submersible EBM Papst Motor Learn More
  5. March Pumps

    Circulating Pump 830

    830-CI-T 1PH

    $870.75

    March - 830-CI-T: Circulating Pump 

    The ultimate in reliability in circulating pumps for industrial / hydronic / solar applications up to 29GPM. Depending on application, March hydronic pumps are available in a variety of materials, including pla...

    Cast Iron 115/230v 29GPM Learn More
  6. March Pumps

    320 AP-MD High Pressure Pump

    320AP-MD

    $542.25
    High Pressure or Head centrifugal pump. March 320-AP-MD

    Model 320 Seal-Less Magnetic Coupled Corrosion Resistant Centrifugal Pump.

    For applications requiring low flow, but when it's necessary to develop pressure.

    This compact sized corrosion ...

    115v Learn More
  7. March Pumps

    Magdrive pump ODP

    MDX-MT3 115V

    $442.13

    Magnetic Drive Pump 115V, 6' Power Cord, 3-Prong Plug, Open Drip Proof - ODP motor. For beer making will handle wort at boiling temperature. 0135-0036-0400 For corrosive chemicals and solutions. Volute, magnet housing and impeller are glass-filled...

    115v ODP Learn More
  8. March Pumps

    PPS Magnetic Circulation pump 115v

    809-PL 115V

    $384.75
    The ultimate in reliability in circulating pumps for industrial / hydronic / solar brewery applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, bronze, stainless steel, and cast ...
    115v Learn More
  9. March Pumps

    PPS plastic Circ pump

    809-PL-HS 230V

    $432.00
    Inline circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell) is the oldest material in the high performance, injection-moldable category. For beer making will han...
  10. March Pumps

    PPS plastic Circulation pump

    809-PL-HS 115V

    $418.50
    Inline circulating pump, Ryton pump housing. 809HS is a PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum) is the oldest material in the high performance, injection-moldable category. Food Grade plastic. For beer making will ...
    115v High Speed Hot Wort Brew pump Learn More
View as List Grid

Items 51-60 of 137

Set Descending Direction
per page