My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 236

Set Descending Direction
per page
Page
  1. March 815-BR-C Bronze Circulation pump

    March Pumps

    Bronze Circulation pump

    815-BR-C 115V
    $517.50
    Bronze Circulation pump with motor and base. The ultimate in reliability in circulating pumps for industrial/hydronic/solar applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, b...
    115v Center inlet Learn More
    Add to Wish List Add to Compare
  2. March 821-CI-T Circulating Pump 821S

    March Pumps

    Circulating Pump 821S

    821-CI-T 115V
    $743.63
    The ultimate in reliability in circulating pumps for industrial/hydronic/solar applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, bronze, stainless steel, and cast iron. Specif...
    Learn More
    Add to Wish List Add to Compare
  3. March 809-PL-HS-24VDC PPS Magnetic Circulation pump 24 volt

    March Pumps

    PPS Magnetic Circulation pump 24 volt

    809-PL-HS 24VDC Brush
    $513.00
    Brushless 24vdc motor Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in c...
    24v High Speed Learn More
    Add to Wish List Add to Compare
  4. March 809-PL-HS-C-12VDC PPS Magnetic Circulation pump

    March Pumps

    PPS Magnetic Circulation pump

    809-PL-HS-C 12VDC Brush
    $438.75

    12vdc motor Circulating pump,

    Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in circulating...

    12v High Speed Brush Center Inlet Learn More
    Add to Wish List Add to Compare
  5. March 809-BR-HS-C-12 Bronze Circulation pump

    March Pumps

    Bronze Circulation pump

    809-BR-HS-C 12DC
    $550.13

    12v Pump with center inlet. The ultimate in reliability in circulating pumps for industrial / hydronic / solar / marine applications. Depending on application, March hydronic pumps are available in a variety of materials, including plastic, bronze...

    Center inlet 12v Learn More
    Add to Wish List Add to Compare
  6. March 893-05 24v Air Cooled Pump

    March Pumps

    24v Air Cooled Pump

    893-05 24VDC
    $236.25

    12v Air Cooled pump.

    Designed to operate at 12 DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps are capable of serving...

    24v Learn More
    Add to Wish List Add to Compare
  7. Booster Pump SS

    Sta-Rite

    Booster Pump SS

    HPS10F3-01
    $3,596.00
    This Booster Pump is the most durable booster pump available. SS Pump Body. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...
    Learn More
    Add to Wish List Add to Compare
  8. march 24v pump circulation

    March Pumps

    24v pump circulation 24V DC

    893-08
    $427.50

    24v Air cooled pump.

    Designed to operate 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps are capable of serv...

    24vdc Brushless Learn More
    Add to Wish List Add to Compare
  9. Booster Pump SS

    Sta-Rite

    Booster Pump SS

    HPS10G3-01
    $4,315.00
    This Booster Pump is the most durable booster pump available. SS Pump Body. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...
    230/460v 2hp Learn More
    Add to Wish List Add to Compare
  10. Bronze Centrifugal Pump

    Oberdorfer Pumps

    Bronze Centrifugal Pump

    101M-F13
    $1,253.98
    Close coupled Bronze Centrifugal pump with motor.
    • All Bronze
    • Marine Use
    • Carbon Face Mechanical Pump Seal
    • Explosion Proof Motors Available
    • Will Handle Contaminated Liquids
    • Extremely Quiet
    • A Standard in the Marine Air Conditioning Industry
    • Counter...
    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 61-70 of 236

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. inlet size Less than 1in Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 143 items
  2. Magnetic Coupled (Seal-less) Pumps 92 items
Phase (Ø)
  1. Single (1) 119 items
  2. Three (3) 41 items
Voltage (Range)
  1. 110-120 68 items
  2. 208-240 3 items
  3. 220-240/460-480 10 items
  4. 110-120/220-240 45 items
  5. 220-240 13 items
  6. 208-240/460 31 items
  7. 12/24/36 VDC 46 items
Horse Power (HP)
  1. 1/4 5 items
  2. 1/3 21 items
  3. 1/2 32 items
  4. 3/4 14 items
  5. 1 14 items
  6. 1 1/2 14 items
  7. 2 1 item
PRICE $
$  -  $
Manufacturer
  1. AMT Pumps 16 items
  2. Finish Thompson Pumps (FTI) 8 items
  3. Flotec Pumps 1 item
  4. Hypro Pumps 3 items
  5. Jabsco Pumps 12 items
  6. Little Giant Pumps 16 items
  7. March Pumps 68 items
  8. MP Pumps 5 items
  9. MTH Pumps 20 items
  10. Oberdorfer Pumps 54 items
  11. Pedrollo Pumps 2 items
  12. Power-Flo Pumps 1 item
  13. RS Corcoran 2 items
  14. Sta-Rite 26 items
  15. Wayne 2 items
Motor
  1. Air-Pneumatic 3 items
  2. ChemDuty 1 item
  3. EXP (C 1, Gp C/D & C11, Gp F/G) 5 items
  4. EXP (C 1, Gp C/D) 2 items
  5. Hermetically Sealed 11 items
  6. ODP 62 items
  7. Open 38 items
  8. PTO 1 item
  9. TEFC 72 items
  10. TENV 25 items