My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 26

Set Descending Direction
per page
Page
  1. AMT - 370C-98: Stainless Steel Centrifugal Pump

    AMT Pumps

    Stainless Steel Centrifugal Pump

    370C-98
    $908.00
    Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bodth single & three phase ODP or TEFC motors available up to 2HP. ...
    230/460v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  2. AMT_MSV1 booster pump

    AMT Pumps

    MSV1 3/4 HP 3 stage pump

    MSV1-3-1P
    $1,052.00
    Multistage Vertical SS booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installa...
    115/208-230V Learn More
    Add to Wish List Add to Compare
  3. MSV1_2.gif

    AMT Pumps

    MSV1 3/4 HP 4 stage pump

    MSV1-4-1P
    $1,135.00
    Multistage Stainless Steel Vertical water booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required...
    115/208-230V Learn More
    Add to Wish List Add to Compare
  4. MSV1_3.gif

    AMT Pumps

    MSV1 3/4 HP 5 stage pump

    MSV1-5-1P
    $1,160.00
    Stainless Multistage Vertical booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical i...
    115/208-230V Learn More
    Add to Wish List Add to Compare
  5. March_TE-5.5 pump

    March Pumps

    PolyPro magdrive PUMP

    TE-5.5C-MD 1PH 1/3HP
    $1,002.00

    PolyPro magdrive PUMP. Involute design w/closed impeller magnet assembly. Chemical pumps for industrial process applications, aquariums, chillers and other clear liquids. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller.

    Kidney dialysi...

    115/230v TEFC motor Learn More
    Add to Wish List Add to Compare
  6. March TE-5.5C-MD-3P PP PUMP

    March Pumps

    PP PUMP

    TE-5.5C-MD 3PH 1/3HP
    $884.00
    Special Price;March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of...
    Learn More
    Add to Wish List Add to Compare
  7. march te-6k 3-phase pps

    March Pumps

    Kynar magdrive pump

    TE-6K-MD 3PH 1/2HP
    $1,027.00

    Kynar magdrive pump, Magnetic Coupled Pump .5 Hp.

    PVDF Impeller 3.125. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The impel...

    230/460v Learn More
    Add to Wish List Add to Compare
  8. March AC-5SSB-MD March Stainless Steel Beer making pump

    March Pumps

    March Stainless Steel Beer making pump

    AC-5SSB-MD
    $941.00

    March beer pump is a non-self-priming magnetic drive unit built specifically to handle hot wort and water.The unit requires beer being pumped to lubricate the internal parts. If the pump is run dry for a period of time the impeller and shaft may b...

    March Nano Brewery Pump 115v Learn More
    Add to Wish List Add to Compare
  9. March TE-5.5C-MD-AC-1P PolyPro PUMP

    March Pumps

    PolyPro PUMP

    TE-5.5C-MD-AC 1PH
    $890.00
    March TE5.5 magnetic pump. Involute design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller . This pump has a A/C motor 50/60 HZ.

    Pump can be fitted with optional priming chamber to provide self-pr...

    115/230v ODP motor Learn More
    Add to Wish List Add to Compare
  10. march pump TE_6t

    March Pumps

    March Ryton magdrive 1/2 hp

    TE-6T-MD 3PH 1/2HP
    $1,026.00

    March Centrifugal Magnetic Coupled Pump .5 Hp. Magnetic pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The broad range of construction materials ...

    230/460v 1/2HP Ryton Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 26

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. inlet size 1" Remove This Item
  2. PRICE $ $700.00 - $899.99 Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 11 items
  2. Magnetic Coupled (Seal-less) Pumps 15 items
Phase (Ø)
  1. Single (1) 14 items
  2. Three (3) 7 items
Voltage (Range)
  1. 110-120 4 items
  2. 220-240/460-480 7 items
  3. 110-120/220-240 11 items
  4. 220-240 1 item
Horse Power (HP)
  1. 1/3 4 items
  2. 1/2 4 items
  3. 3/4 8 items
  4. 1 1 item
  5. 1 1/2 1 item
PRICE $
$  -  $
Motor
  1. Air-Pneumatic 3 items
  2. ODP 4 items
  3. Open 2 items
  4. TEFC 17 items