My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 59

Set Descending Direction
per page
Page
  1. AMT - 370C-98: Stainless Steel Centrifugal Pump

    AMT Pumps

    Stainless Steel Centrifugal Pump

    370C-98
    20% Off Special Price $726.40 Regular Price $908.00
    Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Bodth single & three phase ODP or TEFC motors available up to 2HP. ...
    230/460v 3/4HP TEFC Learn More
    Add to Wish List Add to Compare
  2. 369D-98_17.gif

    AMT Pumps

    Cast Iron Centrifugal Pump

    370D-95
    20% Off Special Price $553.60 Regular Price $692.00

    Cast Iron Centrifugal Pump Designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. three phase TEFC motor.

    When pumping bio-d...

    230/460v 1HP TEFC Learn More
    Add to Wish List Add to Compare
  3. Pedrollo T65 05H36S Regenerative Turbine pump CI

    Pedrollo Pumps

    Regenerative Turbine pump CI

    T65 05H36S
    20% Off Special Price $309.82 Regular Price $387.28
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplic...

    3-Phase Industrial 1/2HP Learn More
    Add to Wish List Add to Compare
  4. Pedrollo PKH07H36S Turbine pump 1HP Peripheral Impeller

    Pedrollo Pumps

    Turbine pump 1HP Peripheral Impeller

    PKH07H36S
    $609.76
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplic...

    3 phase Learn More
    Add to Wish List Add to Compare
  5. Pedrollo PK20H36S Clear water pump

    Pedrollo Pumps

    Clear water pump

    PK20H36S
    $1,028.97
    Turbine Pump, Peripheral pump, clear water pump.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materialsfrom which the pump is made. For their reliability, simplicity...

    2HP 230/460v Learn More
    Add to Wish List Add to Compare
  6. MP 22741 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    22741
    $1,390.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  7. MP 24481 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    24481
    $1,160.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  8. MP 25457 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    25457
    $1,320.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
  9. MP 22731 MP Centrifugal pump

    MP Pumps

    MP Centrifugal pump

    22731
    $1,020.00

    MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. 

    American made cast iron transfer p...

    3/4HP 230/460v TEFC Learn More
    Add to Wish List Add to Compare
  10. MP 22839 Series 30 w/ motor

    MP Pumps

    Series 30 w/ motor

    22839
    $1,030.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
    Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 59

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Three (3) Remove This Item
  2. inlet size 1" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 50 items
  2. Magnetic Coupled (Seal-less) Pumps 9 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 2 items
  3. 220-240/460-480 38 items
  4. 208-240/460 18 items
Horse Power (HP)
  1. 1/3 5 items
  2. 1/2 16 items
  3. 3/4 17 items
  4. 1 10 items
  5. 1 1/2 3 items
  6. 2 6 items
  7. 3 2 items
PRICE $
$  -  $
Motor
  1. ChemDuty 1 item
  2. EXP (C 1, Gp C/D) 5 items
  3. ODP 17 items
  4. TEFC 36 items