Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
March Pumps
Magnetic pump electric Explosion Proof
TE-5.5C-MD XP 1PH 1HP
$2,903.00Stainless Steel magnetic pump and electric Explosion proof motor.
Chemical pumps for industrial process, photo, solvents, and other clear liquid applications. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller . This pump is a 316 stainl...
115/230v 1HP Learn More -
March Pumps
Magnetic pump electric Explosion Proof
TE-5.5C-MD XP 1PH 1/3HP
$1,883.00Stainless Steel magnetic pump and electric Explosion proof motor. OBSOLETE see 0151-0113-0100. Chemical pumps for industrial process, photo, solvents, and other clear liquid applications. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller...
115/230v OBS Learn More -
AMT Pumps
Cast Iron 3/4hp Pump
370A-95
$634.00Designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor.See Curve D
Series: Centrifugal Pumps ...115/230v 3/4HP TEFC Learn MoreMP Pumps
MP Centrifugal pump
22852
$1,180.00MP Centrifugal pump. Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge. MP Centrifugal pump made in MI.MP Pumps
Series 30 w/ motor
24189
$960.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.5 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.MP Pumps
Series 30 w/ motor
26542
$1,430.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.MP Pumps
Series 30 w/ motor
22771
$1,200.00Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-0.75 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.MP Pumps
Series 30 w/ motor
25434
$690.80Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.Flotec Pumps
Stainless Steel Sprinkler Utility Pump
2825SS-01
$349.00Features:- Stainless Steel Pump Housing
- Continuous duty rated 1 HP, 115 Volt motor , 3,450 RPM
- Permanently lubricated Bearings mean no maintenance problems
- Completely portable; pump mounted on stand with handle
- Factory installed 6' power cord wit...
Simer sprinkler pump Learn MoreMTH Pumps
Turbine Pump 1/2HP
T41BAB051OB
$1,154.67Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a...