My Cart

Turbine Pump 1/2HP

Model Number
T41BAB051OB
$909.19
MTH T41BAB051OB Turbine  Pump 1/2HP
Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well as the chemical industry and many other process applications.All units are tested to specifications before leaving the factory.They are used for boiler feed, condensate return and other hot water handling applications and will handle entrained air, or other gases and vapors in quantities that would vapor bind normal centrifugal pumps (up to 20% by volume). Low NPSH RequirementsT41BAB0510B,T41BABO51OB,T41BABO510B
More Information
Model Number T41BAB051OB
Series MTH T41 Regenerative Turbine Pump to 20gpm
Max Flow (GPM.) 4
Max Flow GPH 240
TDH Maximum (Ft) 600
TDH Maximum (PSI) 260
Horse Power (HP) 1/2
Horsepower (IE .5, 1, 1.5, 20) 0.5000
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials Bronze
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 50/60
Motor ODP
Speed (RPM.) 3450
Motor Frame 56C
Self Priming Yes
Max Operating Temperature (F) 230
Viscosity Milk 3.20 cp 40.00 ssu
Shaft 304SS
Length (In.) 15.000000
Mechanical Seal No
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Impeller Number (In.) B
Other Bronze is ASTM B62. Pumps can be rotated in 90 increments or mounted vertically. Handles vapors up to 20% by volume. Low NPSHr.
Drain Yes
Port Rotation Yes
Weight (Lbs) 35.000000

Supporting Docs

Supporting Docs
pdf
(Size: 711.71 KB) Extension: pdf