Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
4901-95
$1,008.00High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...208-230/460v 3HP ODP Learn More -
March Pumps
March Ryton Magdrive Pump
TE-7R-MD 3PH 3/4HP
$1,143.00March Series 7 magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the m...
3/4HP 230/460v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1HP
JME3-58
$1,452.00This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 2HP
JMG3-41
$2,119.00This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Webtrol
Corrosion Resistant Pump
PC50R-3PH
$2,175.95- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC75R-3PH
$1,507.81Webtrol PC Series Centrifugal pump iscompletely corrosion resistantthrough the use of 316 stainlesssteel and high impact, glassreinforced Noryl. The compact,light weight design of the PCSeries Centrifugal makes itideal for cabinet installationa...3/4HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC100R-3PH
$2,329.44Corrosion resistant Centrifugal Pump.- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel impeller insert & wear ring
1HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH
$2,593.53- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump TEFC motor
PC33R-3PHT
$2,589.00- Close coupled
- 316 Stainless steel
- Glass Reinforced Noryl
- Ability to rotate the discharge in 90 degree increments.
1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC50R-3PH-T
$2,349.74Corrosion resistant Centrifugal Pump.- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1/2HP 208-230/460V TEFC Learn More
