My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 21-30 of 56

Set Descending Direction
per page
  1. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5495-98

    25% Off Special Price $816.75 Regular Price $1,089.00
    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiri...
    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contaminant free pumping. Learn More
  2. Sta-Rite

    2 HP Sprinkler Pump

    BPDH20

    25% Off Special Price $1,461.75 Regular Price $1,949.00

    Sprinkler Pump PDHG. Quick priming PD Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contr...

    2HP 230v/1 Learn More
  3. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M-1

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

    230v-1ph Learn More
  4. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M-1

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  5. AMT Pumps

    Stainless Self Priming Solids Pump

    2767-98

    25% Off Special Price $1,637.25 Regular Price $2,183.00
    This line of AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable...
    230v/1 3 HP Learn More
  6. Pacer Pumps

    SE2FB C5.0C Plastic Self priming pump

    58-12F2-C5.0C

    $1,652.00
    S pump close coupled to a TEFC electric motor. Self priming FRP plastic resists abrasive particles, good for most water, brackish and mild chemical transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such a...
    5HP 230v/1 Learn More
  7. Pacer Pumps

    SE2HL C5.0C

    58-12H4-C5.0C

    $1,870.00
    S pump close coupled to a TEFC 5 HP 230V electric motor. Self priming FRP plastic resists abrasive particles, good for most water transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride...
    5HP 230v/1 Learn More
  8. Sta-Rite

    Irrigation Pump 2 1/2 hp Pro Storm

    DS3HHG-01

    25% Off Special Price $2,071.50 Regular Price $2,762.00

    The Pro Storm Series of cast iron irrigation pumps offer superior unmatched performance, available in 1 HP through 2 1/2 HP models. The Pro Storm DS2 now DS3 offers “single-body-fill” priming to 25-foot lifts, in less than 5 minutes! The Pro Storm...

    230v/1 2.5HP Learn More
  9. Pacer Pumps

    SE2JLCSS C5.0C

    58-12J4P 58-0016

    $3,070.00

    S pump long coupled to a TEFC 5 HP 230V electric motor. Self priming Polyester plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Bearing pedestal is cast iron with two ball bearings and SS shaft....

    5hp 230/1 Learn More
  10. Sta-Rite

    2 1/2 HP Sprinkler Pump

    BPDH25

    25% Off Special Price $1,671.75 Regular Price $2,229.00

    Sprinkler Pump PDHHG

    Quick priming PD Series Pumps feature lightweight construction in a selfpriming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump cont...

    230v Learn More
View as List Grid

Items 21-30 of 56

Set Descending Direction
per page