My Cart

SE2FB C5.0C Plastic Self priming pump

5HP 230v/1
Model Number
Pacer 58-12F2-C5.0C SE2FB C5.0C Plastic Self priming pump

Pacer 58-12F2-C5.0C

S pump close coupled to a TEFC electric motor. Self priming FRP plastic resists abrasive particles, good for most water, brackish and mild chemical transfer applications. Widely used to transfer and spray de-icing / anti-icing solutions, such as calcium chloride, salt brine. For on-truck applications see same pump with gasoline engine. 316 SS internal fastners. For salt or abrasives upgrade shaft seal to Silicon Carbide SiC option 136A See Curve "F"
More Information
Model Number 58-12F2-C5.0C
Series Pacer S Self Priming Pump to 280gpm
Max Flow (GPM.) 170
Max Flow GPH 10200
TDH Maximum (Ft) 115
TDH Maximum (PSI) 50
Horse Power (HP) 5
Horsepower (IE .5, 1, 1.5, 20) 5.0000
Inlet Connection Type FNPT
inlet size 2"
Inlet (In.) 2
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 304SS, Polyester
Elastomers / O-ring Buna-Nitrile
Voltage (V) 230
Voltage (Range) 220-240
Phase (Ø) Single (1)
Motor Frequency 60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 143/5TC
Self Priming Yes
Suction Lift (FT.) 25
Max Operating Temperature (F) 120
Viscosity Cream 16.50 cp 100.00 ssu
Shaft 304SS
Mechanical Seal Yes
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Motor Bearings Ball
Impeller Number (In.) F
Other Pump and motor are assembled and mounted on a epoxy coated steel base plate. Motor does not have a cord. Typical motor is Baldor brand.
Do not pump substances which have pH factor of over 10 or a temperature of over 200 Deg. F. The PERFORMANCE CHART is based on water.
Impeller Material Polyester FRP, semi-closed
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation No
Country of Manufacture United States
Weight (Lbs) 115.000000
Warranty (YRS.) 1
GPM Of Water At 60 Feet Of Head 110
GPM Of Water At 80 Feet Of Head 75