My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 51

Set Descending Direction
per page
Page
  1. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5483-98

    $861.00

    AMT Stainless Steel Straight Centrifugal pump is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring contaminant f...

    1 HP 230v/460v HV Learn More
  2. Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10V-M207

    $1,612.74
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • PVDF construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation with IEC m...
    1.5HP 230/460v Learn More
  3. March Pumps

    Kynar Magdrive Pump

    TE-7K-MD 3PH 1HP

    $1,543.00

    March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...

    230/460v 1HP Kynar Learn More
  4. EBARA Pumps

    Stainless Steel Centrifugal Pump

    ACDU120/110T3G

    $1,153.17
    The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long-...
    1HP 230/460V TEFC Learn More
  5. American Stainless C15017B1D3 SS pump  motor
    Sale

    American Stainless

    SS pump & motor

    C15017B1D3

    44% Off Special Price $401.00 Regular Price $715.58

    SS pump and motor by American Stainless ASP. Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump...

    1HP 230/460V ODP Learn More
  6. AMT Pumps

    Cast Iron Centrifugal Pump

    370D-95

    $692.00

    Cast Iron Centrifugal Pump Designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. three phase TEFC motor.

    When pumping bio-d...

    230/460v 1HP TEFC Learn More
  7. Finish Thompson Pumps (FTI)

    Magnetic coupled pump

    DB10P-M207

    $1,421.30
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1.5HP 230/460v Learn More
  8. American Stainless

    SS horizontal pump with 1 hp motor.

    S14320B1T3

    $700.49
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...
    1HP 230/460V TEFC Learn More
  9. MP Pumps

    Series 60 w/ motor

    27675

    $1,700.00
    MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...
    1HP 230/460v TEFC Learn More
  10. MP Pumps

    Series 30 w/ motor

    22839

    $1,030.00
    Series 30 End Suction Centrifugal Pump uses a close-coupled Cast Iron Electric Motor-1 HP, 3-phase, 230/460 V. The pump has 1" NPT suction and 0.75" NPT horizontal or vertical discharge.
View as List Grid

Items 1-10 of 51

Set Descending Direction
per page
Page