My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 89

Set Descending Direction
per page
  1. Oberdorfer Pumps

    Bronze Closed Coupled Centrifugal Pump

    500-F21

    $1,500.00

    The special pump alloys used provide corrosion resistanceto many liquids including water, water solutions, and a wide range of commercial chemicals. Questions as to the chemical compatibility of special liquids should be referred to the factory. ...

  2. RS Corcoran

    Hazardous-Location Centrifugal Pump

    2000D EXP 1/2HP

    $3,185.00

    Hazardous-Location Centrifugal Pump 316 Stainless 1/2HP 230/460v EXP. Built for pumping chemicals and corrosives in hazardous locations, these Type 316 stainless steel pumps have a motor that's UL listed and CSA certified for use in Class I, Group...

    1/2HP 230/460v EXP Learn More
  3. March Pumps

    Explosion Proof Magnetic Pump

    335CP-MD-Exp

    $2,588.88

    Explosion Proof Magnetic Pump, March model 335 Seal-less magnetic coupled corrosion resistant centrifugal pump is for applications requiring maximum pressure with minimal flow. EXP motor for use in hazardous duty atmosphere.

    This easily maintaine...

    115v Hazardous Duty Learn More
  4. March Pumps

    Magnetic Kynar Pump EXP

    TE-7.5K-MD XP 3PH 2HP

    $4,913.00
    Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of natural Kynarï½®. This makes them ideal for sensitive applications where even a trace of foreign matter is unacceptable.

    Exp. Proof Moto...

    2hp/3ph/explosion proof Learn More
  5. March Pumps

    Ryton mag pump Exp

    TE-MDX-MT3 XP 1PH

    $2,154.00
    Ryton, FKM magnetic pump with EXP motor. Used for bio-medical, photographic processing, biodiesel and chemical mfrg.

    CAUTION: BE SURE EXP. CLASSIFICATIONS AND INSTALLATION CRITERIA IS MET PER THE NEC AND LOCAL CODES.

  6. MP Pumps

    CHEMFLO 1 w/ Exp motor

    30885-1

    $2,199.00

    Explosion Proof / Hazardous Duty pump and motor.

    Stainless Steel centrifugal pump CF1 w/ Explosion Proof motor 2hp. Due to motor size this pump should not opperate over 40gpm, it will overload the motor. See performance curve. 5.3" impeller.

    Fea...

    2HP 230v/1 EXPlosion Proof Learn More
  7. American Stainless

    Close coupled pump EXP motor

    C15418B2X1

    $1,759.91
    Stainless pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not ha...
    2HP 115/230V EXP Learn More
  8. American Stainless

    Close coupled pump/mtr 2 HP 3ph

    C15418B2X3

    $1,388.56
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...
    2HP 230/460V EXP Learn More
  9. Finish Thompson Pumps (FTI)

    AC4 Horiz. Cent. Pump EXP

    AC4STS1V350BD015C19

    $2,131.40
    Explosion Proof Hazardous duty 3P motor.

    Rugged, metallic sealed centrifugal AP Series pumps are compact in design, easy to operate and handle, and very economically priced.

    Built from high quality 316 stainless steel the AP Series pumps are ...

    3/4HP 3ph Explosion proof Learn More
  10. Gorman-Rupp Pumps

    Explosion Proof Sefl Priming 1Hp Pump

    81-1/2D3-X1-1P

    $4,385.00

    81-1/2D3-X1-1P

    Gorman-Rupp Explosion Proof, Self-priming Centrifugal pumps is designed for use in hazardous environments and/or for handling flammable liquids. 1-1/2" and 2" NPT port sizes available with single and 3-phase motors 1/2 to 2 HP. All...

    1HP 115/230v X-Proof Learn More
View as List Grid

Items 61-70 of 89

Set Descending Direction
per page