Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
Magnetic coupled pump Polypro
DB15P-2-M211
$3,949.93FTI DB15P-2-M211 Magnetic coupled pump. Finish Thompson chemical pump with superior sealless design.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful ...
3HP 230/460v 182TC Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump PEO
DB11P
$2,296.60Magnetic centrifugal pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installati...
PEO PolyPro 56C Learn More -
Finish Thompson Pumps (FTI)
FTI DB11 pump PEO
DB11V
$2,937.79Magnetic centrifugal pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical in...
Pump End Only Kynar Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump PEO
DB22P
$5,051.54Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Polypropylene or PVDF, the DB series operates durably in the most...Pump End Only no motor Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump
DB22P5-M213
$6,489.35Magnetic centrifugal pump 5HP by FTI - DB22P
Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump. Constructed from Polypropylene the DB seri...
Polypro 5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
Magnetic Acid pump Hazardous Duty
DB22P5-NS-M508
$7,473.63Magnetic Acid pump Hazardous Duty, close coupled to a UL listed Explosion Proof motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump...Polypro 5HP EXP 230/460v Learn More -
Finish Thompson Pumps (FTI)
Magnetic Acid pump Hazardous Duty
DB22P4-NS-M514
$8,506.55Magnetic Acid pump Hazardous Duty, close coupled to a UL listed Explosion Proof motor. Born from a painstaking, extensive effort, the efficiency of the db series lowers energy consumption and operating costs over the long life cycle of the pump...Polypro 7.5HP EXP 230/460v Learn More -
Finish Thompson Pumps (FTI)
Magnetic centrifugal pump
SP22P-M238
$5,446.19SP Series Magnetic Drive Self-Priming Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. The SP Series combines deep-lift capabilities and lightning-fast priming with the advantages of neody...7.5hp, 230/460/3ph Learn More -
Finish Thompson Pumps (FTI)
FTI Magnetic pump PEO
DB15V
$3,942.25FTI Finish Thompson - DB15V: Magnetic coupled pump. Kynar chemical process pump. Superior PVDF design in a sealless magdrive pump. Pump End Only- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up t...
Pump Only Kynar Learn More -
Finish Thompson Pumps (FTI)
FTI Magnetic pump Kynar
DB15V-4-M215
$4,400.46DB15V-4-M215: FTI Magnetic coupled pump. Finish Thompson line of chemical handling pumps featuring their state of the art sealless design- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%...
2HP 230/460v Learn More
