My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 41

Set Descending Direction
per page
Page
  1. March Pumps

    March Pump 1/15HP

    AC-3CP-MD 115V

    $437.63

    March Pump 230v, Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. Open Air Cooled Motor. They are rated up to 10GPM (33LPM) flow and for heads up to 20.5 ft (4.5m) (39 ft. [13m] when d...

    115v Open Motor Learn More
  2. March Pumps

    MAG Pump 1/12HP

    AC-4C-MD 230V

    $444.38

    Series 4 pumps can deliver a maximum flow of 14 GPM (50 LPM) and are capable of serving applications with a maximum head of 21.5 ft. (4.7m) (49 ft. [15.6 m] when driven by an air motor). Applications include electronic medical equipment, etchin...

    230v ODP Learn More
  3. March Pumps

    12v DC Pump

    893-03 12VDC

    $220.50

    12v DC pump Air Cooled.

    Designed to operate at 12v or 24 volts DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). 18" wire leads. All Serie...

  4. March Pumps

    PPS plastic Circ pump

    809-PL-C 230V

    $438.75
    Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell) is the oldest material in the high performance, injection-moldable category. For beer making will handle wor...
    230v Center inlet Learn More
  5. March Pumps

    PPS Magnetic Circulation pump 12 volt

    809-PL-HS 12VDC Brush

    $437.63
    Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in circulating pumps for i...
    12v High Speed Learn More
  6. March Pumps

    PPS Magnetic Circulation pump 24 volt

    809-PL-HS 24VDC Brush

    $513.00
    Brushless 24vdc motor Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in c...
    24v High Speed Learn More
  7. March Pumps

    PPS Magnetic Circulation pump

    809-PL-HS-C 12VDC Brush

    $438.75

    12vdc motor Circulating pump,

    Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in circulating...

    12v High Speed Brush Center Inlet Learn More
  8. March Pumps

    PPS Magnetic Circulation pump

    809-PL-HS-C 115V

    $426.38

    115v motor Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï® by Phillips Petroleum, Fortron® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in circulating p...

    115v High Speed Brush Center Inlet Learn More
  9. March Pumps

    Beer Pump

    809-PL-HS-C-Beer

    $426.38
    115v motor Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide (Trade names Rytonï½® by Phillips Petroleum, Fortronï½® by Honeywell). For beer making will handle wort at boiling temperature.The ultimate in reliability in circulati...
    115v High Speed Brush Center Inlet Learn More
  10. March Pumps

    24v Air Cooled Pump

    893-05 24VDC

    $236.25

    12v Air Cooled pump.

    Designed to operate at 12 DC, March Series 893 pumps are small in physical size and can deliver a maximum of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pumps are capable of serving...

View as List Grid

Items 1-10 of 41

Set Descending Direction
per page
Page