PPS plastic Circ pump
-
Model Number:
809-PL-C 230V
-
Product Name:PPS plastic Circ pump
-
Manufacturer:
-
Series (30 Models):
230v Center inlet
Model Number
809-PL-C 230V
$343.00
March 809-PL-C 230V
Circulating pump, Ryton pump housing. PPS, polyphenylene sulfide
(Trade names Rytonï½® by Phillips Petroleum,
Fortronï½® by Honeywell) is the oldest material in
the high performance, injection-moldable category. For beer making
will handle wort at boiling temperature.The ultimate in reliability
in circulating pumps for industrial/hydronic/solar applications.
Depending on application, March hydronic pumps are available in a
variety of materials, including plastic, bronze, stainless steel,
and cast iron. Specific models are designed to operated with fluid
temperatures as high as 350F (176C), such as in hot water systems
or with hot oil for food products such as beer wart. Special
designs can withstand temperatures up to 500F (260C). Models are
available for use on 12 and 24 volt DC systems (for uses such as
heating systems on public buses) as well as 115 or 230v AC systems
(popular for use in domestic, industrial and commercial hot water
solar heating applications). Because the motors can be removed
without draining the system, service is greatly simplified. Larger
pumps are available with either flange or threaded inlets and
outlets. Seal-less Magnetic drive. Made in the USA. **809-PL is
Polysulfil Plastic
Series: 809
815 Magnetic Pumps
Model Number | 809-PL-C 230V |
---|---|
part number | 0809-0064-0600 |
Series | 809 & 815 Circulating Pumps 4-8gpm |
Max Flow (GPM.) | 5 |
Max Flow GPH | 300 |
TDH Maximum (Ft) | 7 |
TDH Maximum (PSI) | 3 |
Horsepower (IE .5, 1, 1.5, 20) | 0.0400 |
Watts | 90.000000 |
Inlet Connection Type | MNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.75 |
Outlet Connection Type | MNPT |
Outlet (In.) | 0.5 |
Wetted Materials | 316SS, PPS-Ryton, Teflon |
Elastomers / O-ring | Silicone |
Voltage (V) | 230 |
Voltage (Range) | 220-240 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor | Open |
Speed (RPM.) | 3450 |
Self Priming | No |
Max Operating Temperature (F) | 250 |
Viscosity | Water 1.00 cp 31.00 ssu |
Shaft | 316SS |
Length (In.) | 8.000000 |
Mechanical Seal | No |
Other | Motor has conduit box, no cord set. Maximum flow rates range from 5.5GPM (13.7 LPM) to 7.5 GPM (.22 LPM) for DC-powered units, and from 4.5GPM (13.7 LPM) to 8GPM (28 LPM) with AC-powered models. |
Pump Bearing | PPS-Ryton |
Impeller Material | Ryton |
Cord Length (Ft.) | 1 |
Duty | Continuous |
Drain | No |
Port Rotation | No |
Country of Manufacture | United States |
Weight (Lbs) | 7.000000 |
>
March Pump – Originator of the Centrifugal Sealless Magnetic Drive Pump
US Manufacturer Of Centrifugal Sealless Magnetic Drive Pumps for Chemical, Industrial, Medical, Marine, Solar and OEM applications.
Flows from 1/2 gpm to 200 gpm
Heads up to 160 feet
Available in plastic and metallic construction
AC, DC, Explosion Proof, and Air Motors
Submersible and Non-Submersible