Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
March Pumps
Magnetic Kynar Pump
TE-7.5K-MD 1PH 2HP
$3,799.00SALE Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of natural Kynarï½®. This makes them ideal for sensitive applications where even a trace of foreign matter is unacceptable. Chemical p...2HP ,1ph Learn More -
Finish Thompson Pumps (FTI)
FTI DB5.5P Magnetic pump Polypro
DB5.5P-M233
$829.19Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/4 Hp 115V, TEFC Learn More -
Finish Thompson Pumps (FTI)
FTI DB5.5 Magnetic coupled pump Polypro
DB5.5P-M226
$905.98Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/2 Hp 115V, 60 Hz TEFC Learn More -
Finish Thompson Pumps (FTI)
DB4 Magnetic pump PVDF Explosion proof
DB4V-M530
$1,549.30Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1/3hp 1phase Explosion proof Learn More -
Finish Thompson Pumps (FTI)
DB5.5V-M613 pump Kynar
DB5.5V-M233
$961.63Magnetic coupled pump all Kynar PVDF for extreme chemical resistance.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-couple...
1/4 Hp 115V, TEFC, Kynar Learn More -
March Pumps
TE-7K-MD Wet End Kit Parts
0155-0166-0100
$733.00March 7K pump parts, repair kit, Wet End. Parts can be bought individually or in complete Wet End Kits. Kynar PVDF wet end kit. Magdrive totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magn...
March 7K Kynar PVDF Pump repair kit parts Learn More -
March Pumps
2HP PP Magnetic Pump
TE-7.5P-MD 1PH 2HP
$3,799.00SALE March Magnetic Series 7.5 pumps are the only ones in the March product line with all molded parts constructed of glass filled Polypro. This makes them ideal for corrosive chemical applications. Chemical pumps for industrial process applicatio...
115/230v 2HP PolyPro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10V-M207
$1,612.74Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation with IEC m...
1.5HP 230/460v Learn More -
Finish Thompson Pumps (FTI)
FTI DB8 pump
DB8V-M227
$1,380.12FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...1/2HP 230/460v TEFC Kynar Learn More -
Finish Thompson Pumps (FTI)
FTI DB7 pump
DB7P-M226
$1,396.00Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, ...
1/2HP 115/230v PolyPro Learn More
