My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 21

Set Descending Direction
per page
Page
  1. DB5.5 pump by FTI

    Finish Thompson Pumps (FTI)

    FTI DB5.5 Magnetic coupled pump Polypro

    DB5.5P-M226
    $905.98
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/2 Hp 115V, 60 Hz TEFC Learn More
    Add to Wish List Add to Compare
  2. FTI DB5.5 Magnetic coupled pump

    Finish Thompson Pumps (FTI)

    DB4 Magnetic pump PVDF Explosion proof

    DB4V-M530
    $1,549.30
    Magnetic coupled pump.
    • Five-year warranty
    • Extended run dry ability (with carbon bushing)
    • High operating efficiency —Up to 70%
    • Polypropylene construction
    • Powerful neodymium magnets
    • Close-coupled design
    • Horizontal or vertical installation w...
    1/3hp 1phase Explosion proof Learn More
    Add to Wish List Add to Compare
  3. Finish Thompson FTI DB8 kynar PVDF pump

    Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M227
    $1,380.12
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 230/460v TEFC Kynar Learn More
    Add to Wish List Add to Compare
  4. fti_db7_1.jpg

    Finish Thompson Pumps (FTI)

    FTI DB7 pump

    DB7P-M226
    $1,396.00

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, ...

    1/2HP 115/230v PolyPro Learn More
    Add to Wish List Add to Compare
  5. Finish Thompson DB8P-M266 FTI DB8 pump

    Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8P-M226
    $1,145.28
    Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...
    1/2HP 115/230v Learn More
    Add to Wish List Add to Compare
  6. Finish Thompson FTI DB8v kynar PVDF pump

    Finish Thompson Pumps (FTI)

    FTI DB8 pump

    DB8V-M226
    $1,443.56
    FTI DB8 Kynar pump is Magnetic coupled sealless. DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, th...
    1/2HP 115/230v TEFC Kynar Learn More
    Add to Wish List Add to Compare
  7. fti_db7.jpg

    Finish Thompson Pumps (FTI)

    FTI DB6 pump

    DB6HP-M227
    $1,325.00

    Introducing the DB Series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With design-aided magnetic flux and computational fluid dynamics technology, the DB Series packs all the high-pressure, fl...

    1/2HP 230/460v PolyPro Learn More
    Add to Wish List Add to Compare
  8. march pump te-6

    March Pumps

    magdrive pump Ryton March 6

    TE-6T-MD 1PH 1/2HP
    15% Off Special Price $939.25 Regular Price $1,105.00

    Magdrive pump March 6, Ryton

    Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. TE-6T-MD-1P-1/2HP Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide ov...

    115/230v 1/2HP Ryton Learn More
    Add to Wish List Add to Compare
  9. march pump te-6

    March Pumps

    magdrive pump PP March 6

    TE-6P-MD
    15% Off Special Price $682.55 Regular Price $803.00

    Polypropylene Magdrive pump March 6,

    Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. Magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload pro...

    115/230v 1/2HP PolyPro Learn More
    Add to Wish List Add to Compare
  10. Serfilco 44-4105 1x3/4MKGC-C.5

    Serfilco

    1x3/4MKGC-C.5

    44-4105
    $1,188.77
    Centrifugal Horizontal Magnetic Coupled Pump .5 Hp. Series D magnetic coupled pumps are seal-less, providing for maintenance-free and leak-proof operation. The magnetic coupling acts as a clutch to provide overload protection. The broad range of ...
    1/2HP 115/230V Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 21

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Magnetic Coupled (Seal-less) Pumps Remove This Item
  2. Horse Power (HP) 1/2 Remove This Item
Clear All
Shopping Options
Category
  1. Back Pullout 7 items
  2. Chemical Processing Pumps 20 items
  3. Dry Running Pumps 7 items
Phase (Ø)
  1. Single (1) 16 items
  2. Three (3) 5 items
Voltage (Range)
  1. 110-120 1 item
  2. 208-230/460//190-220/380-415 3 items
  3. 220-240/460-480 2 items
  4. 110-120/220-240 12 items
  5. 220-240 1 item
  6. 208-240/460 2 items
inlet size
  1. 1" 13 items
  2. 1 ½" 1 item
PRICE $
$  -  $
Motor
  1. ChemDuty 2 items
  2. EXP (C 1, Gp C/D & C11, Gp F/G) 2 items
  3. TEFC 17 items