Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10V-M207
$1,612.74Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation with IEC m...
1.5HP 230/460v Learn More -
March Pumps
316SS March 7 Pump Air Moror
TE-7S-MD-Air
15% Off Special Price $2,827.10 Regular Price $3,326.00316SS March Series 7 magdrive pump with AIR motor / pneumatic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXPlosion proof req...Air motor Learn More -
March Pumps
316SS March 7 Magdrive Pump
TE-7S-MD 1PH 1HP
15% Off Special Price $2,439.50 Regular Price $2,870.00316SS March Series 7 magdrive pump.
Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors for EXP requirements.
- Applications:
-
...
115/230v TEFC Learn More - Applications:
-
March Pumps
316SS Magdrive Beer Pump
TE-7SSB-MD 1PH 1HP
15% Off Special Price $2,359.60 Regular Price $2,776.00March 316SS Magdrive Beer Pump.
TE-7SSB-MD 3Ph 1HP Beer Pump. Magnetic totally enclosed pumps are the "workhorses" or the March product line. Ceramic spindle is standard.
- Applications:
- Beer making
Replaces 0155-0249-0800, 0155-0249-...
115/230v Learn More - Applications:
-
March Pumps
Kynar Magdrive Pump
TE-7K-MD 3PH 1HP
15% Off Special Price $1,311.55 Regular Price $1,543.00March Series 7 magdrive PVDF Kynar pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft, and allowing the motor t...
230/460v 1HP Kynar Learn More -
March Pumps
Magnetic pump electric Explosion Proof
TE-5.5C-MD XP 1PH 1HP
$2,903.00Stainless Steel magnetic pump and electric Explosion proof motor.
Chemical pumps for industrial process, photo, solvents, and other clear liquid applications. Max. flow 30GPM. Head 41 ft. Temps. to 250F. 3.187 impeller . This pump is a 316 stainl...
115/230v 1HP Learn More -
Finish Thompson Pumps (FTI)
DB Magnetic pump
DB10P-M218
$1,681.00Magnetic coupled pump. Introducing the DB series magnetic drive pump—the new standard for high hydraulic efficiency and corrosive fluid handling. With computer design-aided magnetic flux and computational fluid dynamics technology, the DB serie...1HP 115/230v Polypro Learn More -
Finish Thompson Pumps (FTI)
Magnetic coupled pump
DB10P-M207
$1,421.30Magnetic coupled pump.- Five-year warranty
- Extended run dry ability (with carbon bushing)
- High operating efficiency —Up to 70%
- Polypropylene construction
- Powerful neodymium magnets
- Close-coupled design
- Horizontal or vertical installation w...
1.5HP 230/460v Learn More -
March Pumps
Self prime magnetic pump
SP-TE-7P-MD 3PH 1HP
15% Off Special Price $1,599.70 Regular Price $1,882.00March pump 7 self-priming magnetic magdrive pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Contact us for additional materials, port sizes, or motors. old 0155-0187-0200- Applications:
- Computer Cooling ...
230/460v Learn More - Applications:
-
March Pumps
Magnetic pump with Exp. proof motor
TE-7R-MD XP 1PH 1HP
$3,014.00Magnetic pump with Explosion proof motor. Series 7 magdrive pumps are the "workhorses" or the March product line. Ceramic spindle is standard. Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive sha...March 7 Pump Explosion proof 115/230v Learn More
