My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 41

Set Descending Direction
per page
  1. Griswold Pumps

    Irrigation Pump

    75JMT ODP

    $5,315.55
    Designed for applications where moderate amounts of dirt and debris might be in the water. The semi-open cast iron impeller is designed to handle this abrasive material better than an enclosed impeller. This impeller can easily be re-adjusted aft...
  2. MP Pumps

    Flomax 15 Pump End Only

    21372

    $1,480.00

    Flomax 15 PPK are self-priming pumps, pipe size 3" NPT. Gas Engine Driven Pump End Only PEO for use with a 1" diameter crankshaft. For mounting to a gas engine. Also available in pedestal mount or for NEMA JM motor mounts. See other models. see fl...

    Engine Mount 3" CI Learn More
  3. MP Pumps

    Series 300

    26812

    $6,190.00
    Enclosed impellers are dynamically balanced to improve efficiency and bearing life. Standard carbon / ceramic / FKM mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
  4. MP Pumps

    Series 300 PTO

    27005

    $3,080.00
    PTO End Suction Centrifugal Pump, frame mount with bearing pedestal foot mount. Made for belt drive or long coupled with shaft coupling.
    PTO drive Learn More
  5. Berkeley Pumps

    B2-1/2TPMS Centrifugal Water Pump

    B54572

    $6,164.00 $6,164.00 Click for price

    B2-1/2TPMS Centrifugal Water Pump B54572.

    Centrifugal water pump by Berkeley. Heavy duty, cast iron End suction centrifugal pump, close coupled to a electric motor with mechanical seal.

    BERKELEY Close-Coupled End-Suction Pumps are ideal for most...

    7.5HP 230/460v Learn More
  6. TrunkPump

    Ventrac Steiner Tractor water Pump

    TP-3VS

    $2,279.00

    Ventrac Steiner Tractor water Pump

    Dewatering plastic PTO pumps work off the idea of Drive, Dip, Pump, and Go. A easy one person job now. Strong FRP PTO powered dewatering pump fits category one, 3-point hitch PTO powered @ 540 rpm (1000 avail.) ...

    3" Vertrac pump 420gpm FRP Learn More
  7. MP Pumps

    Hydraulic driven centrifugal pump

    27285

    $5,580.00
    Hydraulic driven centrifugal pump. End Suction Centrifugal Pump, close coupled to a hydraulically 1.16 driven motor. Pump has standard SAE two bolt "B" flange and 13 tooth internal spline shaft and is mounted to a Ultra hydraulic motor 2TR019. Of...
  8. AMT Pumps

    3" Gas Engine Trash Pump

    3941-96

    $2,029.00

    Gas Engine Driven Trash pumps is designed for applications which require high flow efficiency and solids handling capability. Dewatering pump. Obsolete see 3S9XHR. Trash Pumps are constructed of heavy duty sand cast components featuring removable ...

    8HP B/S Vanguard Learn More
  9. TrunkPump

    High Volume Dewatering PTO pump

    TP-3PT

    $3,689.00

    Dewatering plastic PTO pumps work off the idea of Drive, Dip, Pump, and Go. A easy one person job now. Strong FRP PTO powered dewatering pump fits category one, 3-point hitch PTO powered @ 540 rpm (1000 avail.) tractors. Dewater golf course, playi...

    3" PTO pump 420gpm FRP Learn More
  10. Gorman-Rupp Pumps

    Bronze Circulator Pump

    5745-97

    25% Off Special Price $1,200.00 Regular Price $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Bronze Circulator 3/4HP 115/230v Learn More
View as List Grid

Items 11-20 of 41

Set Descending Direction
per page