Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Cast Iron Centrifugal Pump
369C-95
$746.94the straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor. All models ...115/230v 1HP TEFC Learn More -
Sta-Rite
J Centrifugal Pump High Head 1HP
JHE-63HL
$1,502.00Water Booster pump, High Head centrifugal. Often used on sprinkler systems. This pump has a heavy-duty cast iron construction with Noryl impeller. JHE-63HL. Replaces Myers CT10
- Applications: Water systems and sprinkling for homes, farms and ind...
1HP 115/230v High PSI Booster Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1HP
JME3-58
$1,452.00This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
230/460v Learn More -
Sta-Rite
JB Centrifugal Pump High Head 1HP
JBHE3-63S
$1,798.00This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear rin...
-
AMT Pumps
Self Priming 12V dc Pump
12SP10C-12V
$1,632.0012VDC Self-priming Solids Handling pump
for circulating, liquid transfer and dewatering applications. Battery powered AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer,...
1HP 12VDC Battery Learn More -
AMT Pumps
12 Volt DC Washdown Pump 12v
12DC-95
$2,580.8112 Volt DC Washdown pumps
Obsolete see new model to right. 12vdc are designed for OEM, Septic Service, Pumper and Marine applications requiring a DC motor. Wash-down pumps is specifically designed for filling sinks and toilets. The motor has a on...
12vdc Cast Iron Learn More -
AMT Pumps
High Pressure Cast Iron Centrifugal Pump
489F-95
$1,028.50High pressure - head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water...1HP 3-Phase TEFC motor - OBSOLETE, call or email for alternative assistance. Parts still available.
Learn More -
Myers Pumps
High Pressure Centrifugal Pump
CT10B
$1,200.001HP 115/230v Brass impeller Myers CT Series of centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. V...1HP 115/230v Brass impeller Learn More -
MP Pumps
Series 60 w/ motor
27675
$2,640.51MP Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...1HP 230/460v TEFC Learn More -
MP Pumps
Series 60 w/ motor
27674
$2,187.50Series 60 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 1 HP, 1-phase, 115/230 V, 3450 RPM. The pumps are right hand rotatio...1HP 115/230v Learn More
