My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-19 of 19

Set Descending Direction
per page
Page
  1. AMT Pumps

    Sprinkler Booster pump

    3655-95

    25% Off Special Price $1,478.25 Regular Price $1,971.00

    Sprinkler pump 5HP Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. Sprinkler pumps self-prime to 20 feet. Single stage feature a built-in check valve to...

    5HP 230/460v ODP Learn More
  2. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  3. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CB-5M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...

  4. MP Pumps

    Flomax fuel pump

    34387

    $7,280.00
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Explosion proof EXP hazardous duty Electric Motor 5 HP. Pump has FKM mechanical seal and BunaN gaskets, no flapper valve and a pump bas...
  5. MP Pumps

    FM 15 w/ motor

    24395

    $3,440.00
    Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast Iron Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same.
    5HP 230/460v CI Learn More
  6. MP Pumps

    FM 15 Stainless Steel w/ motor

    36609

    $7,060.00

    Stainless Steel FM15. Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Pump using Close-Coupled Cast SS pump, close coupled Electric- 5 HP. Trimmed impeller 5.5 inch. See flow curve for same. 

    American Bureau of Shipping (ABS) a...

    5HP 230/460v SS Learn More
  7. Munro Pumps

    Medium Head Work Horse Pump

    MULP3005B3

    $3,047.00
    Self-priming Work Horse. The impeller, diffuser, brackets, and volutes are all made of cast iron. The suction flange includes a flapper style check valve. Motor shaft is a full 1.25" diameter (instead of the typical 56J at .625"). Motor is a NE...
    5HP 230/460v Learn More
  8. MP Pumps

    2CT Trash Pump

    44092

    $4,620.00
    2CT Jaeger Trash Pumps, self-priming, cast iron. Pumpak for close-coupled electric motor drive provided separately.

    The Model 2CT is a 2" x 2" Self Priming Trash Pump which can be close coupled. This unit has cast iron construction with a ducti...

    5hp, 3ph Learn More
  9. AMT Pumps

    Heavy Duty High Flow Centrifugal Stainless

    3152-98

    20% Off Special Price $1,915.20 Regular Price $2,394.00

    Heavy Duty High Flow Centrifugal Stainless 5HP pump

    AMT Industrial Straight Centrifugal pumps are suited for liquid and chemical transfer, brine heating and cooling, recirculation, booster service and other industrial applications. Semi-open impe...

    230/460v 5HP TEFC SS Learn More
View as List Grid

Items 11-19 of 19

Set Descending Direction
per page
Page