Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C
$1,772.40- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glass-...
-
Pacer Pumps
ISE2GBL PNC
58-52GBL PNC Air powered
$1,953.85Air powered Selfpriming pump. 304 SS external and fastners with Polyester internals, fitted with a Silicon carbide faced shaft seal. Unit mounted on a metal base plate. Hydraulic motor is close coupled. Air motor allows for easy controll over the...Pneumatic Pump 2" Learn More -
Flotec Pumps
Jet Pump Water well
FP4012
$555.00Corrosion resistant shallow well jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, have a high resistance to sand and abrasive wear and assure years of dependable service. Ideal for shallow well applications with pumping lev...
1/2HP 115/230v Learn More -
AMT Pumps
Cast Iron SelfPrime
2764-95
20% Off Special Price $873.80 Regular Price $1,092.25AMT IPT Self-priming solids handling pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of h...230/460v 1-1/2HP ODP Learn More -
AMT Pumps
High Pressure Bronze Centrifugal Pump
4900-97
23% Off Special Price $1,370.52 Regular Price $1,779.90High Head Centrifugal Pumps. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure...230v 3HP ODP Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-10MT
$10,880.00High pressure centrifugal Pump.
Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ... -
Pacer Pumps
ISPE2GL D3.0C
58-52G4D3.0C
$2,430.60Self-Priming SS Centrifugal Pumps, Pump casing is made of 304 stainless steel. Internal parts are glass reinforced polyester or glass reinforced polypropylene. All pumps include a built-in check valve.
These pumps are standard for mobile shower o...
3HP 230/460v/3 Stainless 2" Learn More -
AMT Pumps
Self Priming Centrifugal Pump
285E-95
23% Off Special Price $625.86 Regular Price $812.81Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Light WVO, vegi oil, biodiesel. Used in a Biodiesel Processor application where it's pumping oil through it & sm...1/2HP 115/230v TEFC Learn More -
Hypro Pumps
Cast Iron Centrifugal Pedestal Pump
9203C-R
$1,798.80- Planetary oil bath gear drive
- Pedestal mount, direct drive
- Max. pressure: 170 psi
- Max. speed: 6000 rpm
- Shaft: 5/8" solid
- Port sizes:
- 9203C-R 1-1/2" NPT inlet, 1-1/4" NPT outlet
- Max. fluid temperature: 140ｺF
- Housing: cast iron
- Impeller: glas...
-
Oberdorfer Pumps
Bronze Centrifugal Pump Pedestal
60PS-10
$1,028.30Bronze Centrifugal Pedestal mounted for long coupling to customer drive. The liquid flow is proportional to the pump speed--the higher the speed the greater the flow. Horsepower required varies directly as flow and pressure. Maximum horsepower is ...
