Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Pacer Pumps
SPRY2HLN D5.0C PP
58-22H88-D5.0C
$1,932.00S pump close coupled to a TEFC 5 HP 230V/460v electric motor. Self priming Polypro plastic resists abrasive particles, good for many mild chemical and most water transfer applications. Non metallic internals. No wetted metal parts. Used often as ...5HP 230/460v Learn More -
Pacer Pumps
SY2HVN D5.0C
58-32H99-D5.0C
$4,087.50S pump close coupled to a TEFC 5 HP 230V/460v electric motor. Self priming Ryton plastic resists good for many mild acids chemical and most water transfer applications. Non metallic internals. No wetted metal parts. Used often as a chemical sump ... -
Pacer Pumps
PCE3FL-D5.OC Plastic pump
60-13F4-D5.OC
$1,667.00Plastic PC Horizontal Pump
All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, s...
5HP 230/460v Learn More -
MTH Pumps
Turbine Pump 5 HP
T51RBF503BT
$3,704.87Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...5HP 230/460v Bronze Fitted Learn More -
MTH Pumps
Turbine Pump 5HP
T51MBF503OB
$3,395.83Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...ODP 230/460v Learn More -
MTH Pumps
Turbine Pump 5HP
T51MAB503OB
$3,787.34Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...ODP 230/460v Learn More -
MTH Pumps
Turbine Pump 5HP
T51MAB503TB
$4,311.31Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...TEFC 230/460v Learn More -
MTH Pumps
Turbine Pump 5HP
T51PBF503OB
$3,390.96Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...ODP 230/460v Learn More -
Munro Pumps
Medium Head Work Horse Pump
MULP3005B3
$3,047.00Self-priming Work Horse. The impeller, diffuser, brackets, and volutes are all made of cast iron. The suction flange includes a flapper style check valve. Motor shaft is a full 1.25" diameter (instead of the typical 56J at .625"). Motor is a NE...5HP 230/460v Learn More -
MP Pumps
316 stainless steel centrifugal 5HP
31383-6
$2,653.00Chemical pump 5HP 575v. Solid cast 316 Stainless steel Centrifugal Pump for corrosive chemical and other industrial applications.575V Learn More