My Cart

Turbine Pump 5 HP

5HP 230/460v Bronze Fitted
Model Number
MTH T51RBF503BT Turbine Pump 5 HP


Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as the chemical industry and many other processapplications. For Boiler Feed and Condensate Return Service, Low Flow, Pumping Clean Fluids, Nonflammable Liquids. All units are tested to specifications before leaving the factory. Low NPSH Requirements.

Turbine Pump, Bronze-Fitted, 5 HP, 3 Phase, Voltage 208-230/460, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 300 PSI, Length 17 3/8 In., Height 7 1/2 In., Width 8 1/8 In.

More Information
Model Number T51RBF503BT
Series MTH T51 Regenerative Turbine Pump 40gpm at 250psi
Max Flow (GPM.) 40
Max Flow GPH 2400
TDH Maximum (Ft) 500
TDH Maximum (PSI) 216
TDH BEP (FT.) 440.000000
Horse Power (HP) 5
Horsepower (IE .5, 1, 1.5, 20) 5.0000
Inlet Connection Type FNPT
inlet size 1 ¼"
Inlet (In.) 1.25
Outlet Connection Type FNPT
Outlet (In.) 1
Wetted Materials Cast Iron
Elastomers / O-ring Buna-Nitrile
Voltage (V) 208-230/460
Voltage (Range) 208-240/460
Phase (Ø) Three (3)
Motor Frequency 50/60
Motor TEFC
Speed (RPM.) 3450
Motor Frame 56C
Self Priming Yes
Max Operating Temperature (F) 230
Viscosity Cream 16.50 cp 100.00 ssu
Shaft 304SS
Length (In.) 15.000000
Mechanical Seal No
Mechanical Seal Face Carbon-ceramic
Mechanical Seal Type Single
Motor Bearings Ball
Other Bronze is ASTM B62. Pumps can be rotated in 90 degree increments or mounted vertically.

GPM @ 10 PSI 41.0 GPM @ 20 PSI 40.6 GPM @ 30 PSI 40.0 GPM @ 50 PSI 38.0 GPM @ 75 PSI 36.0 GPM @ 100 PSI 34.5

Impeller Material Bronze, Regenerative Turbine
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 130.000000

Supporting Docs

Supporting Docs
(Size: 736.91 KB) Extension: pdf