My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 126

Set Descending Direction
per page
Page
  1. AMT 368A-98 Stainless Steel Centrifugal Pump

    AMT Pumps

    Stainless Steel Centrifugal Pump

    368A-98
    $843.00
    Stainless steel pump is designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, Biodiesel mixing, liquid transfer and cooling.
    • Type 6 mechanical seal
      • ...
    115/230v 1/3HP TEFC Learn More
    Add to Wish List Add to Compare
  2. Bronze Centrifugal Pump

    AMT Pumps

    Bronze Centrifugal Pump

    368B-97
    $903.00
    Bronze 1/2 HP pump Designed for continuous-duty low pressure OEM, marine, salt water, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling.

    See Curve B

    replaces obs 36...
    115/230V 1/2HP TEFC Learn More
    Add to Wish List Add to Compare
  3. March LC-3CP-MD MAG Pump 1/20HP

    March Pumps

    MAG Pump 1/20HP

    LC-3CP-MD 115V
    $462.00

    March magnetic pump, submersible or open air. March Seawater Circulation Pumps

    Simple, versatile and reliable, March Series 3 pumps feature an "orbital" magnetic drive and leak-proof design. They are rated up to 10GPM (33LPM) flow and for heads u...

    submersible or open air 115v Learn More
    Add to Wish List Add to Compare
  4. Pedrollo PQA03A16S Aggressive Liquid Turbine pump

    Pedrollo Pumps

    Aggressive Liquid Turbine pump

    PQA03A16S
    $508.82
    Aggressive Liquid Turbine pump. Peripheral pump with Ryton chemical resistant plastic body.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the ...

    1/3HP 115v Pl/Br Learn More
    Add to Wish List Add to Compare
  5. Sta-Rite - HP7D: Booster Pump Multi Stage

    Sta-Rite

    Booster Pump Multi Stage

    HP7D-02
    $2,184.00
    This Multi Stage Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydrau...
    115/230v Learn More
    Add to Wish List Add to Compare
  6. Sta-Rite - HP10E: Booster Pump

    Sta-Rite

    Booster Pump

    HP10E-02
    $2,316.00
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...
    1HP 115/230v Learn More
    Add to Wish List Add to Compare
  7. Pedrollo PQA05A16S Aggressive Liquid Turbine pump

    Pedrollo Pumps

    Aggressive Liquid Turbine pump

    PQA05A16S
    $513.97
    Aggressive Liquid Turbine pump. Peripheral pump with Ryton chemical resistant plastic body.

    They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pum...

    1/2HP 115v Learn More
    Add to Wish List Add to Compare
  8. Power-Flo PFACE Self priming utility pumps

    Power-Flo Pumps

    Self priming utility pumps

    PFACE
    $515.18
    High pressure booster pump is designed for portability and ease of operation. Suction strainer, and two (2) 3/4" garden hose adapters included. Ideally suited for wash down, emergency water supply, boat and dock wash down, swimming pool / spa t...
    1/2HP 115v Learn More
    Add to Wish List Add to Compare
  9. High Volume SS Straight Centrifugal Pump

    AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5475-98
    $702.00

    The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and applications requiring ...

    1/2Hp 115/230v Learn More
    Add to Wish List Add to Compare
  10. Sta-Rite - HP10C Booster pump

    Sta-Rite

    Booster Pump

    HP10C-02
    $1,837.00

    Water Booster Pump

    Sta-rite high pressure are the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or ...

    1/2HP 115/230v 10gpm Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 126

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Phase (Ø) Single (1) Remove This Item
  2. inlet size Less than 1" Remove This Item
Clear All
Shopping Options
Category
  1. Mechanical Sealed Pump 85 items
  2. Magnetic Coupled (Seal-less) Pumps 41 items
Voltage (Range)
  1. 110-120 55 items
  2. 208-240 2 items
  3. 110-120/220-240 49 items
  4. 220-240 8 items
  5. 12/24/36 VDC 10 items
Horse Power (HP)
  1. 1/4 5 items
  2. 1/3 16 items
  3. 1/2 25 items
  4. 3/4 7 items
  5. 1 7 items
  6. 1 1/2 1 item
PRICE $
$  -  $
Motor
  1. EXP (C 1, Gp C/D & C11, Gp F/G) 5 items
  2. EXP (C 1, Gp C/D) 2 items
  3. Hermetically Sealed 7 items
  4. ODP 39 items
  5. Open 16 items
  6. TEFC 43 items
  7. TENV 9 items