Aggressive Liquid Turbine pump
Series (28 Models):
Product Name:Aggressive Liquid Turbine pump
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY, SIMPLICITY OF USE AND ECONOMY THEY ARE SUITABLE FOR RESIDENTIAL USE AND IN PARTICULAR FOR DISTRIBUTING WATER IN COMBINATION WITH SMALL PRESSURE SETS, FOR IRRIGATING GARDENS OR Mixing.
Patented design has aluminum bracket with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity.
Electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty with thermal overload protector. ClassF insulation.
Do not be fooled by cheap, low priced imitations, Processor Pump Northern, these are the original workhorse design. Made in Italy with fine Italian craftsmanship and years of pump design.
|Max Flow (GPM.)||8|
|Max Flow GPH||480|
|TDH Maximum (Ft)||120|
|TDH Maximum (PSI)||52|
|Horse Power (HP)||1/3|
|Horsepower (IE .5, 1, 1.5, 20)||0.3300|
|Inlet Connection Type||FNPT|
|inlet size||Less than 1"|
|Outlet Connection Type||FNPT|
|Wetted Materials||Bronze, PPS-Ryton|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Single (1)|
|Max Operating Temperature (F)||140|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Country of Manufacture||Italy|