Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
104MP01-J58
$1,116.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Coun...
-
Hypro Pumps
316SS pump .5HP
COMSV123T
$1,259.04316 SS investment cast end-suction centrifugal pump by Hypro Shertech. This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors avail...
230/460v TEFC 1/2HP Learn More -
MTH Pumps
Regenerative Turbine Pump
T31FAB053TB
$1,197.38The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize ...1/2HP 230/460v Bronze Learn More -
Hypro Pumps
Corrosion Resistant PolyPro Pump
CHMPB123T
$842.45Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...230/460v 1/2HP Learn More -
Hypro Pumps
Corrosion Resistant PolyPro Pump
CHMPB123
$836.66Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...230/460v 1/2HP ODP Learn More -
MP Pumps
HTO 80 Pump w/ motor
29711
$3,230.00HTO80 is a patented, unique centrifugal pump designed for high temperature liquid applications. Thermal heat transfer pumps.
Centrifugal Hot Oil Pump Tempuflo Features:
- Applications: Plastics, Chemical, Food, and Processing Industries which re...
1/2HP 230/460v ODP Learn More -
MTH Pumps
Turbine Pump 1/2HP
T51BAB053EB
$2,733.03Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
MTH Pumps
Turbine Pump 1/2HP
T51BBF053EB
$2,380.01Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
MTH Pumps
Turbine Pump 1/2HP
T51BAB053OB
$1,606.40Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
MTH Pumps
Turbine Pump 1/2HP
T51BBF053OB
$1,500.59Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...