Regenerative Turbine Pump
-
Manufacturer:
-
Series (20 Models):
-
Product Name:Regenerative Turbine Pump
-
Model Number:T31FAB053TB
1/2HP 230/460v Bronze
Model Number
T31FAB053TB
$942.82
MTH T31FAB053TB
The T31 Series closed close-coupled regenerative turbine pumps
represent the most economical, high performance alternative for low
flow (1 to 9 GPM) applications involving moderate to high pressures
(heads to 300 feet). T31 impellers utilize balancing holes to
promote hydraulic self-centering and to eliminate the need for
external adjustment. The impeller exerts no thrust load on the
bearings, thereby extending service life. Self-centering is equally
effective whether mounted in the horizontal or vertical position.
The T31 series regenerative turbine pumps meet low net positive
suction head (NPSH) requirements without efficiency loss.
Model Number | T31FAB053TB |
---|---|
Series | MTH T31 Regenerative Turbine Pump 9gpm at 100psi |
Max Flow (GPM.) | 5 |
Max Flow GPH | 300 |
TDH Maximum (Ft) | 150 |
TDH Maximum (PSI) | 65 |
Horse Power (HP) | 1/2 |
Horsepower (IE .5, 1, 1.5, 20) | 0.5000 |
Watts | 0.000000 |
Inlet Connection Type | FNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.75 |
Outlet Connection Type | FNPT |
Outlet (In.) | 0.75 |
Wetted Materials | Bronze |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 208-230/460 |
Voltage (Range) | 208-240/460 |
Phase (Ø) | Three (3) |
Motor Frequency | 60 |
Motor | TEFC |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Max Operating Temperature (F) | 230 |
Viscosity | Water 1.00 cp 31.00 ssu |
Stages | 1 |
Shaft | 304SS |
Length (In.) | 12.500000 |
Mechanical Seal | No |
Mechanical Seal Face | Carbon-ceramic |
Mechanical Seal Type | Single |
Impeller Number (In.) | F |
Drain | Yes |
Port Rotation | Yes |
Weight (Lbs) | 32.000000 |
Warranty (YRS.) | 1 |