Tsurumi Submersible Trash Pump HSD2.55S-61
-
Model Number:
HSD2.55S-63
-
Product Name:Tsurumi Submersible Trash Pump HSD2.55S-61
-
Manufacturer:
-
Series (8 Models):
3/4 HP, 115V, 2" discharge
Model Number
HSD2.55S-63
$792.00
Tsurumi HSD2.55S-63
Tsurumi HSD2.55S-63 Submersible Slurry Pump with Agitator – 3/4 HP, 115V, 2"
The Tsurumi HSD2.55S-63 is a compact submersible slurry pump for abrasive, high-sediment water. Rental and construction crews use it where water is thick with sand and grit.
WHAT IT'S GOOD FOR
• Slurry, mud and high-sediment water on construction sites
• Rental fleets that need a tough sand pump
• Sediment removal from sumps, basins and pits
KEY FEATURES
• Built-in agitator keeps sand and sediment suspended for smooth, clog-free pumping
• High-chrome cast iron impeller and ductile iron casing for abrasive slurry
• Dual inside mechanical seals with silicon carbide faces and Tsurumi's patented oil lifter
• Built-in thermal protection guards against overloading and accidental run-dry
• Permanently lubricated C3 ball bearings rated for a 60,000-hour B-10 life
SPECIFICATIONS
Horsepower: 3/4 HP
Power: 115V, single-phase, 60 Hz
Full-load amps: 7.3 A at 115V
Discharge: 2" angled male NPT
Max flow: 55 GPM (3,300 GPH)
Max head: 42 ft
Max solids: 0.276"
Power cable: 32 ft
Operation: Manual
Runs continuously down to: 4-1/8" of water
Weight: 34 lb
Max water temperature: 104°F (40°C)
Backed by Tsurumi's limited warranty: two years.
Order float control if needed as accessory.
| Model Number | HSD2.55S-63 |
|---|---|
| Series | HS Sand / Solids Submersible Trash Pump |
| Max Flow (GPM.) | 55 |
| Max Flow GPH | 3300 |
| TDH Maximum (Ft) | 42 |
| TDH Maximum (PSI) | 18 |
| Horse Power (HP) | 3/4 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.7500 |
| Outlet Connection Type | MNPT |
| Outlet (In.) | 2 |
| Wetted Materials | 304SS, Ductile Iron, Epoxy coated |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 3450 |
| Max Operating Temperature (F) | 180 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Length (In.) | 15.000000 |
| Mechanical Seal | Yes |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | Max. Diameter (inch) : 9-3/4", Max. Height (inch): 15-3/8". Continuous Running Water Level (inch): 4. ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts. |
| Impeller Material | High Chrome, Semi Vortex |
| Cord Size | 14/3 |
| Cord Length (Ft.) | 32 |
| Motor Insulation | B |
| Duty | Continuous |
| Country of Manufacture | Japan |
| Weight (Lbs) | 36.000000 |
| Warranty (YRS.) | 2 |
| GPM Of Water At 20 Feet Of Head | 40 |
| GPM Of Water At 30 Feet Of Head | 25 |
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.
You May Be Interested In
