Sump Pump and Dual Float with Enhanced Controller 1.5
-
Model Number:
S3033-DFC1.5
-
Product Name:Sump Pump and Dual Float with Enhanced Controller 1.5
-
Manufacturer:
-
Series (28 Models):
1/3HP w/Switch 3Yr Warr.
Model Number
S3033-DFC1.5
$380.00
Pro Series S3033-DFC1.5
Industrial-Grade Performance for Residential Use
The Pro Series S3033-DFC1.5 sump pump combines cutting-edge technology with exceptional durability, offering high-efficiency water management for your home. Designed for residential use but built to industrial standards, this Energy Star rated pump delivers superior performance and energy savings—up to $60 per year compared to conventional models.
This submersible dewatering pump is engineered to handle the toughest conditions, with features that ensure long-lasting reliability and efficiency. Upgrade your system and replace your old Zoeller M53 with the Pro Series S3033-DFC1.5, and experience the difference.
Pump Key Features:
- 3,000 GPH (50 GPM) at 10 ft. lift
- ⅓ HP pump
- Cast-iron/stainless-steel construction
- Energy-efficient permanent split capacitor (PSC) motor
- Premium pump construction
- Water cooled motor (no cooling oil)
- Upper and lower sealed ball bearings
for ultra-quiet operation
- Stainless-steel fasteners for long life
- Dual carbon/ceramic seals plus
(1) Buna-N-Seal
- Thermally protected
- 10 ft. pump cord - 1½" discharge
- Continuous duty rated
- Will fit in 10-inch diameter sump pit
- S3 Series Energy Savings: Average $55* per year
- 5-year warranty when purchased from and installed by a contractor; otherwise 3 years.
Enhanced Controller Key Features:
- Two micro reed activated floats for added reliability
- Protective cage prevents debris from interfering with floats
- Easy installation
- Solid top keeps out sand and dirt
- Vented, curved bottom prevents debris build-up under the float
- Detachable float switch allows the wire to feed through the pit cover for easy installation and maintenance
- Mounts to discharge pipe with included stainless steel hose clamp
- Activation level is adjustable
- Activates pump weekly to exercise and extend pump life
- Pump run time is adjustable
Additional Benefits:
- Weekly Activation: The Dual Float Controller activates the pump weekly to exercise the motor, helping prevent sediment buildup and extending the pump’s lifespan.
- Prevents Mud Build-Up: Keeps your pump running smoothly by preventing debris accumulation.
Dimensions:
13.97” H x 7.87” D
| Model Number | S3033-DFC1.5 |
|---|---|
| Series | Pro Series submersible pumps |
| Max Flow (GPM.) | 53 |
| Max Flow GPH | 3180 |
| TDH Maximum (Ft) | 26 |
| TDH Maximum (PSI) | 11 |
| Horse Power (HP) | 1/3 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.3300 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 1.5 |
| Wetted Materials | 416SS, Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor Frequency | 60 |
| Motor Amps (A) | 4.0000 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Max Operating Temperature (F) | 104 |
| Max Particle Size (In) | 0.1900 |
| Viscosity | Milk 3.20 cp 40.00 ssu |
| Shaft | 416SS |
| Mechanical Seal Face | Carbon-ceramic |
| Mechanical Seal Type | Double |
| Motor Bearings | Ball |
| Other | The Dual Float switch:
|
| Approvals | CSA, UL |
| Impeller Material | Cast Iron, semi-open |
| Cord Length (Ft.) | 10 |
| Duty | Continuous |
| Gallons Per Watt Hour | 6.250000 |
| Weight (Lbs) | 22.000000 |
| Warranty (YRS.) | 4 |
