Submersible Dewatering Pump Contractor
-
Manufacturer:
-
Series (8 Models):
-
Product Name:Submersible Dewatering Pump Contractor
-
Model Number:PF20111
Submersible 1HP 115v And control box
Model Number
PF20111
$6,632.72
Power-Flo PF20111
Submersible Dewatering Pump for utility & below ground
contractor. Contractor heavy duty construction quality at a light
weight. Pump suction is Hard Anodized Aluminum with wear resitant
polyurethane liner. 50FT power cord ..
Cost of ownership is much lower due to being rebuildable with a life expectancy of 20 years, unlike cheaper throw away brands. See why these are the standard pump for AT&T along with Verizon.
Model Number | PF20111 |
---|---|
Series | Utility Contractor Submersible Dewatering Pump |
Max Flow (GPM.) | 175 |
Max Flow GPH | 10500 |
TDH Maximum (Ft) | 76 |
Horse Power (HP) | 2 |
Horsepower (IE .5, 1, 1.5, 20) | 2.0000 |
Watts | 2750.000000 |
Outlet Connection Type | FNPT |
Outlet (In.) | 2 |
Wetted Materials | 304SS, Aluminum |
Elastomers / O-ring | Buna-Nitrile |
Voltage (V) | 115 |
Voltage (Range) | 110-120 |
Phase (Ø) | Single (1) |
Motor Frequency | 60 |
Motor | Hermetically Sealed |
Speed (RPM.) | 3450 |
Self Priming | Yes |
Max Operating Temperature (F) | 140 |
Viscosity | Milk 3.20 cp 40.00 ssu |
Stages | 1 |
Shaft | 304SS |
Mechanical Seal | OIL LUBRICATED |
Mechanical Seal Face | Silicon Carbide |
Mechanical Seal Type | Double |
Motor Bearings | Ball, single row, shielded |
Impeller Size (IN.) | 5.320000 |
Approvals | cUL |
Impeller Material | Polyurethane |
Motor Locked Rotor Amps (A.) | 36.000000 |
Cord Size | 14/4 |
Cord Length (Ft.) | 25 |
Motor Insulation | H |
Duty | Continuous |
Drain | Yes |
Port Rotation | Yes |
Weight (Lbs) | 80.000000 |
Warranty (YRS.) | 1 |
GPM Of Water At 10 Feet Of Head | 105 |
GPM Of Water At 20 Feet Of Head | 82 |
GPM Of Water At 30 Feet Of Head | 53 |