My Cart

Pressure Hand Pump

Model Number
WP2
$128.00
PumpBiz WP2 Pressure Hand Pump

The Oasis Pump is used primarily on wells, cisterns, springs, buried tanks, rivers or streams where maximum lift (distance to water) does not exceed 28-30 feet (9 meters) unless using deep well model. Also use as a Pump Primer.

With its lightweight, sturdy construction the Oasis Pump is ideal for campsites, summer homes, stock water, rural dwellings, parks, picnic areas, plant nurseries, villages or remote locations. Well sampling or de-watering. Hand-Lift Pitcher type pump.

Model No. WP2 - A pressure version of the W1 with pressure capability. Discharge will plumb directly to standard plastic pipe (epoxy or silicone weld) or adapt to hose, etc. Discharge ID fits standard 1.5" pipe socket fit. Discharges up to 0-20lbs. normal operating pressure, up to 50 ft. head. At high pressure a check valve in the discharge line helps.

GENERAL SPECIFICATIONS (ALL MODELS) Discharge 1 1/2 in. Suction 2"FNPT, Height 18 in. Weight 4 pounds. Diameter 3 1/2 in. (3 in. I.D. cylinder). Resistant to salt water, most chemicals. Up to 10 gallons per minute. Maximum Lift (distance to water) 30 ft. 

Black flange in picture is a option or available locally as a 4x3 toilet bowl flange. Pump inlet connection is 2" female pipe thread as provided.

More Information
Model Number WP2
Series Oasis Hand Water Pump
Max Flow (GPM.) 10
Max Flow GPH 600
TDH Maximum (Ft) 50
TDH Maximum (PSI) 22
Inlet Connection Type FNPT
inlet size 2"
Inlet (In.) 2
Outlet (In.) 1.5
Wetted Materials PolyPro
Elastomers / O-ring Buna-Nitrile
Diaphragm Urethane
Self Priming Yes
Suction Lift (FT.) 28
Max Operating Temperature (F) 120
Shaft 304SS
Length (In.) 18.000000
Mechanical Seal No
Mechanical Seal Type Double
Other For smaller size suction connection, use a 2" x _ adapter bushing. Sold seperately.
Drain Yes
Port Rotation Yes
Weight (Lbs) 3.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 316.31 KB) Extension: pdf